Grant Posted January 3, 2014 Share Posted January 3, 2014 Evening allSeen a power flow ss exhaust on flea bay going at a decent price for an EG. Obviously the EG's are shorter, is the general shap le the same though? Or am I wasting my time?Cheers!!! Quote Link to comment Share on other sites More sharing options...
Grant Posted January 3, 2014 Author Share Posted January 3, 2014 Yeah I think they are mate. It's more the rear section in thinking about. If the back end fits I might buy it and extend it. Quote Link to comment Share on other sites More sharing options...
KiNK43 Posted January 4, 2014 Share Posted January 4, 2014 I had both eg and mb mid sections next to each other a while back. They are the same.It's the rear section that's different. Mb is longer and hangers are in a completely different place. Quote Link to comment Share on other sites More sharing options...
marv Posted January 4, 2014 Share Posted January 4, 2014 As said mate the b pipe should fit no probs! When I tried to fit the dc2 back box to mine it wouldn't go, the guys in the unit beside us have a lot of Hondas so I tried a ek,ep3 and eg back box and the were all too short or fouled the arb. The dc2 was the closest. Saying that,the eg back box had custom piping to make it sit at an angle so a standard one may be similar to a dc2? Quote Link to comment Share on other sites More sharing options...
Grant Posted January 4, 2014 Author Share Posted January 4, 2014 Cheers for the input chaps. I might ask him whether he'd consider just the mani back section then. Thanks! Quote Link to comment Share on other sites More sharing options...
NIKH25 Posted January 4, 2014 Share Posted January 4, 2014 Could just sell on the back box if not. Quote Link to comment Share on other sites More sharing options...
Grant Posted January 4, 2014 Author Share Posted January 4, 2014 Could just sell on the back box if not.Yeah possibly what I was thinking. And at this price I may do that. Is a trek thoughhttp://bit.ly/1g7yibx Quote Link to comment Share on other sites More sharing options...
noodels Posted January 4, 2014 Share Posted January 4, 2014 s**t Flow,and cant see the welds !!!caution!! Just get ITR"R" Bpipe<ukdm>> oem s/steel correct bore<if not forced induction> and well made. Quote Link to comment Share on other sites More sharing options...
Grant Posted January 4, 2014 Author Share Posted January 4, 2014 s**t Flow,and cant see the welds !!!caution!! Just get ITR"R" Bpipe<ukdm>> oem s/steel correct bore<if not forced induction> and well made. Are the not much good then?? What is the standard bore? Do you know? I thought they were ok with a 2.25" system?? Quote Link to comment Share on other sites More sharing options...
noodels Posted January 4, 2014 Share Posted January 4, 2014 sound better with 2.5 doesnt upset the speed of gas,depends on your tuning mods ect they fit oem on teg thats good enuff for me.same,ish engine anyway Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.