h4mza Posted July 1, 2014 Share Posted July 1, 2014 Is it easy or hard to install pre facelift EP3 seats. I searched and saw that you need to drill somewhere and they sit high. I've seen people also put Recaros and not have a problem. Is it just the EP3 seats that sit high and is a pig of a job to fit? Quote Link to comment Share on other sites More sharing options...
dr_broon Posted July 1, 2014 Share Posted July 1, 2014 Did need to cut the brackets of a set of rails for an m and weld them on to the ep3 rails, and they do sit higher than the standard seats, but i quite like the position tbh.. I can see a lot more than when I had the original seat slammed to the floor 1 Quote Link to comment Share on other sites More sharing options...
dr_broon Posted July 1, 2014 Share Posted July 1, 2014 http://civic5.com/forum/index.php/topic/1401-dr-broons-vti-deck/page-6 1 Quote Link to comment Share on other sites More sharing options...
Jayhoath83 Posted July 2, 2014 Share Posted July 2, 2014 Thats good to no ep seats are well nice to sit in Quote Link to comment Share on other sites More sharing options...
Krzys Posted July 2, 2014 Share Posted July 2, 2014 Think @DAVEMB2 has them in TrinityD as well! Quote Link to comment Share on other sites More sharing options...
DAVEMB2 Posted July 2, 2014 Share Posted July 2, 2014 Yer I have the red prem seat look list the atr ones but from the late ep3. Mine are sat low no hight and they are weld to m rails have a look at the pics in gallery at top Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.