dellcore Posted October 16, 2014 Share Posted October 16, 2014 Hello friends, not a civic owner yet, but i want to buy this model with B18C4 in maybe 2-3 months, here all these cars are in bad condition but i want to buy one and give him some love i found this site and its good place to askBut the problem are the , how to say, ''tuning'' parts like - suspension,brakes, camber kits, tie bar, lower control arms,bushings, headers, stainless exhaust etc... it seems like its problem to find proper parts for this car, some saying it will fit from integra, some from EK, EG... and im little bit worried to find parts that would fit, my shop will be probably just eBay, because here you cant buy things like this... even searching on ebay - almost nothing for MB6... any help will pe appreciated.If you guys will say ''its hard to find'' i will probably look for some EK3 - i need sedan with powerful engine. Sorry for my bad english, cheers from Slovakia. Quote Link to comment Share on other sites More sharing options...
dr_broon Posted October 16, 2014 Share Posted October 16, 2014 hi, welcome along engine wise, looking at b series bits... a lot are interchangeable, but inake manifolds seem to have different port shapes. suspension wise etc, looking at EG/DC2 for more compatible stuff... EK bits tend to be different as far as I know. also, some parts for MG ZS will fit. There's quite a bit of knowledge (some from bitter experience) on here now... if there's any specific things just shout and someone will let you know Quote Link to comment Share on other sites More sharing options...
Krzys Posted October 16, 2014 Share Posted October 16, 2014 hi, welcome along engine wise, looking at b series bits... a lot are interchangeable, but inake manifolds seem to have different port shapes. suspension wise etc, looking at EG/DC2 for more compatible stuff... EK bits tend to be different as far as I know. also, some parts for MG ZS will fit. There's quite a bit of knowledge (some from bitter experience) on here now... if there's any specific things just shout and someone will let you know Quite well summed up that EK suspension fits but sits lower. Meister R make coilover's specifically for the MB. Engine parts as above. Exhaust, manifolds fit but the rest you might have to have custom fitted or get creative. Most get them custom made or order a longlife one online. Quote Link to comment Share on other sites More sharing options...
dellcore Posted October 17, 2014 Author Share Posted October 17, 2014 thanks for answers,im kinda busy these days, can someone explain term - coilovers? because i dont know these things in english laguage coilovers -> adjustable springs+shocks ? im asking because i found BC racing coilovers especially for MB and they are quite expensive so if EG suspension fits they are lot cheaper , that would be amazingIf mostly parts will fit from EG i would be happy, on e-shops are a lot of parts for it... recently i found headers for B motors from SRS 4-2-1 and somewhere on internet i found tenrai catback for EG tooanother question if lower control arms with tie bar or how you call it , will fit from EGthanks for the list man! but there ale lot of things and im little bit confused , cheers. Quote Link to comment Share on other sites More sharing options...
Krzys Posted October 17, 2014 Share Posted October 17, 2014 coilovers -> adjustable springs+shocks ?Yes, exactly that! EK suspension fits, but your car will sit very low, even at the highest setting, so it's up to you. Quote Link to comment Share on other sites More sharing options...
Dexter Posted October 17, 2014 Share Posted October 17, 2014 Don't worry about parts, i live in Finland and 95% of the time i buy ebay. Once you learn how and what to look for, you'll realise there are literally tons of parts, tuning and service, that'll fit your car. Sure sometimes there will be stuff that's hard to find, but in a difficult situation i've always found help here. So go ahead and buy that M! It'll be one your wisest decisions ever, man. 1 Quote Link to comment Share on other sites More sharing options...
dellcore Posted October 17, 2014 Author Share Posted October 17, 2014 i like being low but not scraping on every hole, so i dont know what means really low -> daily driving problems? EG/EK have the same coilovers type? i will see after i buy the car im confused now... TA Technix coilovers are pretty cheap so i need to know if they fit for MB6, then i need some LCA's... i will ask for help later when im going to buy specific parts.... Quote Link to comment Share on other sites More sharing options...
noodels Posted October 18, 2014 Share Posted October 18, 2014 EK9 rear LCA are longerMBs are fork type so get fork type coilovers Quote Link to comment Share on other sites More sharing options...
Dexter Posted October 18, 2014 Share Posted October 18, 2014 i like being low but not scraping on every hole, so i dont know what means really low -> daily driving problems? EG/EK have the same coilovers type? i will see after i buy the car im confused now... TA Technix coilovers are pretty cheap so i need to know if they fit for MB6, then i need some LCA's... i will ask for help later when im going to buy specific parts.... Zuissi had TA Technix's on his mb6, said they we're ok for the money. I'll ask him about the fit. Quote Link to comment Share on other sites More sharing options...
Dexter Posted October 18, 2014 Share Posted October 18, 2014 You'll need to put the top mounts from your stock suspension to the ta technix's, otherwise it's a straight fit. He also said it's a pretty crap kit, but good if you just want to slam the car. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.