Jump to content

joelufc20

Member
 View Profile  See their activity

  • Posts

    79

  • Joined

  • Last visited

 Content Type 

Everything posted by joelufc20

  1. joelufc20
    where is the bolt located
  2. joelufc20
    where is the adjuster bolt located
  3. joelufc20
    did you bleed the clutch fluid through, try doing that
  4. joelufc20
    i think it could be your thermostat or cooling fan not working
  5. joelufc20
    remove radiator cap and run engine for about 45 mins to purge the air out. top up the expansion bottle then replace rad cap. if that does not work then look at a new thermostat or check radiator for leaks. check oil too maybe oil pump could be knackered. garages never tend to bleed the coolant system properly on these mb civics.
  6. joelufc20
    i leave it for the garage to do, £240 for belt water pump and tensioner at my garage
  7. joelufc20
    http://www.carparts4less.co.uk/car-parts# try these for parts very well priced, honda wanted £50 for just a dizzy cap for my car i told them to get fcuc
  8. joelufc20
    the purests on here recommend honda mtf only however 2 years ago i bought some gear oil which was the same viscosity and replaced mine which improved my transmission greatly
  9. joelufc20
    replace the slave cylinder first then see if it improves which it should then change the clutch when you struggle to get gears. rich from leicester on here does them he quoted me a reasonable price for fitting should i need it
  10. joelufc20
    when you do arches the rust comes through from behind the arch so you need to treat that then paint it with stone chip or waxoil
  11. joelufc20
    the boot holding bracket sometimes wriggles loose so you just pull it up a bit and tighten the 2 screws
  12. joelufc20
    im buying an aftermaket replacement kit and will be fitting it shortly will let you know my results
  13. joelufc20
    have you tried testing the coil and igniter, the coil can go which is inside the dizzy unit. first thing though is check all the ignition relays and fuses next to the battery and under the steering column
  14. joelufc20
    you have to get it hot to bleed it, also these aint self bleeding engines. run engine for about 1 hour with the radiator cap off keeping and eye on the expansion tank so it dont run dry.
  15. joelufc20
    how do you know when you need to replace one?
  16. joelufc20
    how much for the shafts
  17. joelufc20
    easy to do simpo
  18. joelufc20
    car has developed a clunck on full lock just wondered what it could be
  19. joelufc20
    anyone replaced the friction plate on a 1.4 civic. is it hard to do/ does the engine have to come out or has anyobne got a howtoo
  20. joelufc20
    philgor you aint to far away from me. thats good to know im always messing with my civic mines a 1.4
  21. joelufc20
    my aircon made an awful noise at the pulley so i took a knife to the belt. job done
  22. joelufc20
    where dod you get your cupholders from
×
×
  • Create New...