spudley1988

has a map on already and launch control also not that ill be using that.

Magic kink thank you don't know much about all this but see people ranting about the p28's, are they worth it?

The p28 has a map on it with iab delete included but my iab are not deleted yet so was just wandering best way to go about it all

Doesn't putting a skunk 2 inlet on remove butterflies? Any idea why people go p28 if cancels them out?

How do you mean Tom?

Do you know which pipe to cable tie and if theirs any positives to it?

Hey folks bought a p28 ready to go into my mb6 with basemap on it which has launch control and iab delete. However will it still be okay that my iab are all still working or won't it be right?

Hey folks, currently got a stage 1 clutch and flywheel in my mb6, think its exedy would need to double check. Release bearings sadly getting noisy and was recommended to just change the lot while its all out. Where is a good place to source a similar clutch. Seen rpc somewhere but generally looking to stay stage 1 and get another lightened flywheel. Thanks

I'm no mechanic but my mb3 would randomly cut out and sometimes take a while to start. Mine didn't stay at 3k rpm though. Once mine cut out and I put ignition on fuel pump didn't prime. My issue was fuel pump relay. I don't know your full symptoms and as stated am no mechanic but throwing this is on the off chance it may help you out.

Och ffs these m's are a nightmare

I thought eg ones were straight fit but need the arms for dc2?

I don't think I'd regret it once I'd bought them but I'd need to bite bullet and do it. I'd happily buy a decent second hand set from an eg as would be a tad cheaper and should be easy to find surely. Other option was these progressive springs?

I'd love meister r but grudge the price on the age of the car

Was easier to change decat. Will be at my custom exhaust guy soon so be getting him to change flange angle on the cat to throw on for mot

Just going to add some more to this as i've got the 4-2-1 Manny on and its smashing off everything. Not sure what koni it is I've got but it's usual yellow shocks and blue springs? From what I gather possibly changing springs to progressive springs could help? Or seen spacers mentioned. Anybody elaborate a tad more on either of these or point me in the direction of where to be looking. Can barely drive at 40 on some roads and manifolds whacking the ground. Any more help, links or suggestions greatly appreciated

Thanks very much

Thought i'd already done this but cant seem to find the post so here we go again. Bought this almost two years ago now with a fair bit done to her. Back bumper had holes and rear passenger quarter was dented which I sadly didn't get pictures of. Luckily having a bodyshop through work meant I could get these sorted very quickly but sadly not to a standard I would have liked but its better than the dents and holes. Heres a short list koni adjustables evo 4 oz alloys mongoose exhaust and decat apexi neo fully pollybushed stage 2 clutch lightened flywheel short shift de tangod headlights braided brake and clutch lines Wee bit more but cant think of it at this time. Ive not progressed with it much in the time ive owned but I have Added top fuel induction kit 4-2-1 manifold colour coded side skirts colour coded rear bumper mouldings coded door mouldings to be fitted better condition front bumper to be fitted. Not sure how much more ill do as keep getting itches for ep3 or dc2 but cant bite the bullet yet. heres some snaps.

I'm contemplating changing mine but grudge paying a fortune with the age of the car. Possibly find a set of used coilovers from an eg or something along those lines. Keep getting an urge for ep3 so don't want to blow to much on mb

Did advertise that it came with no u clamps but I thought it may have been okay lol. Yeaa didn't realise mathought it was on the pipe. Need a new sensor as it was seized in so no sensor attached atm so she's a bit rich. Hopefully in today for u clamps on the decat pipe.

Got this fitted today and made a rookie mistake. Didn't get clamps to clamp where the decat pipe extends so now blowing like a gas cooker ðŸ˜

Lol I feel your pain h4mza can barely even go to asda without scraping or banging something. If I scrape when driving it's usually a horrible metal sound 😨😞

If back was down a bit would be magic. Front smashes off plenty bumps at 60 though sadly . Contemplated taking inner arch liners out on front but kinda feel they are their for a reason lol.

I don't think mine is the strt but my fronts way lower. Front wheels smash arch liners where as the rears I can fit a few fingers in

Also does it have o2 sensor bit kink?

Isn't Top one just 2 inch or am I way off here 😳