Jump to content

Sampo657

New Members
 View Profile  See their activity

  • Posts

    18

  • Joined

  • Last visited

  • Days Won

    2

 Content Type 

Everything posted by Sampo657

  1. Sampo657

    Fuel filler pipe

    Sampo657 posted a question in SOS! Help!!

    Hi Gus. My car has a very strong smell of fuel from the near side rear. Looking at MOT history it shows that the filler pipe is corroded. I cannot seem to locate a replacement. Any ideas? Thanks
  2. Sampo657
    Thanks mate
  3. Sampo657
    That's the problem. Its not. I can't find anything that it should be connected too
  4. Sampo657
    The hose on top of the throttle body
  5. Sampo657
    Goes in for tuning Friday so will have to be next purchase
  6. Sampo657
    Nice one. On the topic of gauges. Which pin did you wire your air/ fuel into?
  7. Sampo657
    Looks pretty good mate. Did you delete the cigarette lighter? My pal has a 3d printer so will have a play with that. Hopefully be able to fit all 3 in there with a bit of fiddleling
  8. Sampo657
    Evening guys. Looking at mounting 3 x 52mm gauges in the centre console of my Aerodeck. I was wondering what solutions you guys have gone for?
  9. Sampo657
    Spot on. Need to get some more vacuum hose ordered. Have to some how get the p28 ecu to fit my aerodeck next hopefully don't break it
  10. Sampo657
    Yeah mate. Not sure how well it will hold out but I'm sure will do a job. Had to buy few things like injectors, ecu etc
  11. Sampo657
    Probably right mate. Was just a cheap eBay kit. If it cracks IL buy again. If it cracks again IL spend more
  12. Sampo657
    Thanks link. Is it the one with the red bung?
  13. Sampo657
    Been busy this weekend with these swap outs. Still needing a few bits and tinkering but progress
  14. Sampo657
    Thanks mate. Bought a ek4 cable and fitted it partially today. Couldn't seem to get the original bracket to fit. So going to look for something to fit. The intake came with a bracket but it's been lengthened. Do you Know what model the bracket would be from?
  15. Sampo657
    Hi guys. Installing the skunk 2 intake and have came across the crank case breather. Do I need to block it up or leave it open. Red nozzle in picture
  16. Sampo657
    Ok mate cool. There is a few EKS down the scrap yard near me.. so might steal a cable and just use the original bracket
  17. Sampo657
    Cheers guys. Do I need to change the brackets for the cable too
  18. Sampo657
    Sorry if this has been asked before.. I did a quick search and didn't find my answer. I have a Aerodeck Vti.. I have skunk 2 TB and intake. I understand I may need a throttle cable from a DC2 can anyone confirm this? Thanks
  19. Sampo657
    Image of engine bay before I purchased the car. Painted the rocker cover....Before I took it to one of them car washes for a "steam clean" turns out they used a jet wash and got rid of all my hard work and got water in sparks etc...(never again). Haven't taken a picture since the bay has been cleaned and paint removed Have since removed the a/c unit as was not working and to make room for the turbo.
  20. Sampo657
    Very tidy mate. Did you get a P28 ecu? Did you need to Dremel the plugs to make them fit into the ecu?
  21. Sampo657
    It was a lot worse mate. This was probably a year later.. it needed new exhaust and new clutch and the standard cam seal oil leak...but still a bit of a steal. Will do the cosmetic stuff once I can source good parts for reasonable prices
  22. Sampo657
    Hi I'm Mark, New to the page. Got this for a steal at £200. slowly doing bits to her and giving her some much needed TLC Will be adding a turbo kit to her in the next few weeks. If anyone is aware of any Pirates black bumpers going please let me know. Cheers
×
×
  • Create New...