DanialA11 Posted August 10, 2015 Author Share Posted August 10, 2015 @h4mza , would 40 mm Ej/ek springs be ok? I been told that the Eg ek dc2 parts are interchange able and I can only find 40 mm Ej ek springs Mb6 ones are 35mmhttp://pages.ebay.com/link/?nav=item.view&id=200407554806&alt=webThese are the ones u got my eye on as I would like a equal drop Quote Link to comment Share on other sites More sharing options...
DanialA11 Posted August 10, 2015 Author Share Posted August 10, 2015 Could someone just tell me what other civic model springs fit the mb6 chasis I don't want 35mm mb6 sprints as I'm after a 40mm drop Quote Link to comment Share on other sites More sharing options...
KiNK43 Posted August 10, 2015 Share Posted August 10, 2015 all eg ek or whatever springs fit but hard to estimate what drop your gonna achieve using springs from another model. Quote Link to comment Share on other sites More sharing options...
h4mza Posted August 10, 2015 Share Posted August 10, 2015 @DanialA11 I wouldn't recommend EG/EK springs, their spring rates are different as they are lighter cars than MB. I had EG 30mm springs on mine and rear sat way too low and ride was very bouncy. I've heard MG ZS stock suspension is quite good and straight fit. Quote Link to comment Share on other sites More sharing options...
KiNK43 Posted August 10, 2015 Share Posted August 10, 2015 Good advice. I can vouch for mg stuff pretty decent actually. And cheap 1 Quote Link to comment Share on other sites More sharing options...
DanialA11 Posted August 11, 2015 Author Share Posted August 11, 2015 Any picture of how your car's sit with standard mg zs suspension I might just buy the 35mm mb6 springs even tho I wanted a 40mm drop Quote Link to comment Share on other sites More sharing options...
KiNK43 Posted August 11, 2015 Share Posted August 11, 2015 Zs180 stuff. Mode the fronts a bit with a grinder. Although I reckon zs120 would just sit right straight away Quote Link to comment Share on other sites More sharing options...
DanialA11 Posted August 11, 2015 Author Share Posted August 11, 2015 Everyone around local I'm asking has sold the suspension And I'm guessing on a hatch it will sit slightly higher Anyone got any experience with these http://pages.ebay.com/link/?nav=item.view&id=181757055688&alt=webAs I think it's the most simple solution And then I can sell my springs and make my £££ back Quote Link to comment Share on other sites More sharing options...
snakey135 Posted August 11, 2015 Share Posted August 11, 2015 This is MG ZS setup with a 20mm drop on fronts Quote Link to comment Share on other sites More sharing options...
DanialA11 Posted August 17, 2015 Author Share Posted August 17, 2015 Just found out couple of days ago by previous owner the car also has b18cr cams with springs and retainers ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.