Chandler Posted April 6, 2016 Share Posted April 6, 2016 how different was it mate? near enough all oil filters are the same. looking good now its clean Quote Link to comment Share on other sites More sharing options...
Mini_matt Posted April 6, 2016 Author Share Posted April 6, 2016 Couldn't get it off to take a comparison picture but it's noticeably larger diameter and not as long, I did go back and ask if there were two options for the d15 and they said that's the only one, still thinking they picked the wrong part up off the shelf. Quote Link to comment Share on other sites More sharing options...
Chandler Posted April 6, 2016 Share Posted April 6, 2016 oh right. sometimes they are larger mate! i took a bosch one off the smx and its a larger diameter than the Honda one i put on. doesn't matter about the length of it man Quote Link to comment Share on other sites More sharing options...
Mini_matt Posted April 6, 2016 Author Share Posted April 6, 2016 Hmm, maybe I'll try again to undo it, trouble is I don't think I'll be able to undo it without destroying it then I'm stuck! How much oil will come out removing the filter do you recon? I guess most will be down in the sump, guess I could do new oil again while I'm there. Quote Link to comment Share on other sites More sharing options...
Mini_matt Posted April 6, 2016 Author Share Posted April 6, 2016 Can someone tell me what is going on with my passenger seat?! the panel on either side is rock hard and looks to have shrunk Quote Link to comment Share on other sites More sharing options...
Chandler Posted April 6, 2016 Share Posted April 6, 2016 without destroying it?? a little will come out mate. but as i said before, near enough all honda Oil filters are the same Quote Link to comment Share on other sites More sharing options...
Mini_matt Posted April 6, 2016 Author Share Posted April 6, 2016 Yeah I tried really hard to twist it off but it might have to be a screwdriver through job! Quote Link to comment Share on other sites More sharing options...
Chandler Posted April 6, 2016 Share Posted April 6, 2016 just make sure its clean and your hands are dry when you do it, makes it a lot easier Quote Link to comment Share on other sites More sharing options...
Mini_matt Posted April 7, 2016 Author Share Posted April 7, 2016 I had 5 minutes free on my lunch today so decided to sort out my heater. new resistor was ordered off eBay for under £10. pull glovebox forward, unscrew the two screws holding the resistor and unclip the plug. Fit new and put it all back together. new vs old Quote Link to comment Share on other sites More sharing options...
Mini_matt Posted April 7, 2016 Author Share Posted April 7, 2016 That picture is after I attempted twisting it back together last week! They were completely broken and separate before Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.