Butcher Posted April 12, 2016 Share Posted April 12, 2016 Engine light came on today. No apparent problems with the car. Just the light of ever-lasting uncertainty in the dash. How do I check for fault codes and stuff? Had a quick look but I can't see any guides on here. Quote Link to comment Share on other sites More sharing options...
0 dr_broon Posted April 12, 2016 Share Posted April 12, 2016 In the passenger footwell up behind the glovebox there's two connectors... A 2 pin and 5 pin. If you bridge the 2 pin one with a paperclip or something, then turn the ignition on, the light will flash to give you the code. There is some info on here somewhere... I'll have a spy Quote Link to comment Share on other sites More sharing options...
0 dr_broon Posted April 12, 2016 Share Posted April 12, 2016 In the passenger footwell up behind the glovebox there's two connectors... A 2 pin and 5 pin. If you bridge the 2 pin one with a paperclip or something, then turn the ignition on, the light will flash to give you the code. There is some info on here somewhere... I'll have a spy Quote Link to comment Share on other sites More sharing options...
0 dr_broon Posted April 12, 2016 Share Posted April 12, 2016 Seems to have gone awol... It's mentioned here though with the codes... Quote Link to comment Share on other sites More sharing options...
0 Butcher Posted April 12, 2016 Author Share Posted April 12, 2016 Cheers Broon. I think that's one of the threads I looked at before, just went to a dead link. Anyway, found this one, which looks just the ticket. Shall give it a go tomorrow. 1 Quote Link to comment Share on other sites More sharing options...
0 Dave Posted April 18, 2016 Share Posted April 18, 2016 Should be able to get the code with that how to no probs mate. I'll update that broken link too with the fault codes when I get a chance too, thanks for letting us know. Quote Link to comment Share on other sites More sharing options...
0 Dave Posted April 18, 2016 Share Posted April 18, 2016 Here's the codes mate. Found them in an old topic in the Electrical section. You can jump the 2 wires on your diagnostic plug. Then read the number of flashes you get from the light. A long flash reads as a count of 10. short is a count of 1. so 3 long and 2 short would be 32. Then you can look up what code it is. That will tell you what part needs replacing. This is the list of error codes I have for the entire Honda range. Long flashes = tens, and short flashes = single units. 1 Oxygen Sensor "A" (Primary) defective circuit or unplugged / defective sensor 2 Oxygen Sensor "B" defective circuit or unplugged / defective sensor 3 Manifold Absolute Pressure (MAP Sensor) defective circuit or unplugged /defective sensor 4 Crankshaft Angle Sensor (CAS) defective circuit or unplugged/defective sensor 5 Manifold Absolute Pressure (MAP Sensor) mechanical problem / disconnected piping 6 ECT Sensor (Engine Coolant Temperature) defective circuit or unplugged / defective sensor 7 Throttle Position Sensor (TPS) defective circuit or unplugged/defective sensor 8 TDC Position (Top Dead Centre Sensor) defective circuit or unplugged / defective sensor 9 CID Sensor (Number 1 Cylinder position) defective circuit or unplugged / defective sensor 10 IAT Sensor (Intake Air Temperature) defective circuit or unplugged / defective sensor 11 CO pot 12 EGR Lift Sensor (Exhaust Gas Recirculation) defective circuit or unplugged / defective sensor 13 APS Sensor (Atmospheric Pressure Sensor) defective circuit or unplugged / defective sensor 14 IAC/ISCV Valve (Idle Air Control/Idle Speed Control Valve) defective circuit or unplugged / defective sensor 15 Ignition Output Signal missing or defective ignition output signal 16 Fuel Injector System defective circuit or unplugged / defective fuel injector 17 VSS (Vehicle Speed Sensor) defective circuit or unplugged / defective sensor 18 Ignition Timing 19 Automatic Transmission Lock Up Control Solenoid Valve defective circuit or unplugged / defective solenoid valve 20 Electrical Load Detector (ELD) 21 VTEC Solenoid Valve defective circuit or unplugged / defective solenoid valve 22 VTEC Oil Pressure Switch defective circuit or unplugged / defective oil pressure switch 23 Knock Sensor (KS) defective circuit or unplugged / defective sensor 30 Automatic Transmission Signal: "A" / SEAF / SEFA / TMA or TMB 31 Automatic Transmission Signal "B" 41 Primary Oxygen Sensor – Heater circuit malfunction on D16Z6, D16Z7, D16A2 engines 41 Linear Air Flow (LAF Sensor) heater malfunction on D15Z1 engine 43 Fuel Supply System defective or malfunctioning fuel supply system 45 System Too Lean or Too Rich malfunction in the fuel monitoring systems 48 Linear Air Flow (LAF Sensor) defective circuit or unplugged / defective sensor 54 CKF Sensor (Crankshaft Speed Fluctuation) defective circuit or unplugged / defective sensor 58 TDC Sensor 2 (Top Dead Centre) defective circuit or unplugged/ defective sensor 61 Oxygen Sensor, Heated - Sensor 1 (Primary) high voltage, low voltage, or slow response 63 Oxygen Sensor, Heated - Sensor 2 (Secondary) high voltage, low voltage, or slow response 65 Oxygen Sensor Heater (Secondary) malfunctioning or defective oxygen sensor heater 67 Catalyst system Efficiency Below Threshold malfunctioning or defective catalyst system 70 Automatic Transmission malfunction with the automatic transmission controls 71 Cylinder 1 Misfire or a Random Misfire a condition is present that is creating a cylinder misfire 72 Cylinder 2 Misfire or a Random Misfire a condition is present that is creating a cylinder misfire 73 Cylinder 3 Misfire or a Random Misfire a condition is present that is creating a cylinder misfire 74 Cylinder 4 Misfire or a Random Misfire a condition is present that is creating a cylinder misfire 75 Cylinder 5 Misfire or a Random Misfire a condition is present that is creating a cylinder misfire 76 Cylinder 6 Misfire or a Random Misfire a condition is present that is creating a cylinder misfire 80 Exhaust Gas Recirculation insufficient flow detected 86 ECT Sensor (Engine Coolant Temperature) circuit range / performance problem 90 Evaporative Emission Control System leak detected in the fuel tank area 91 Fuel Tank Pressure Sensor low input. 92 Evaporative Emission Control System insufficient purge flow Post is here >>> https://civic5.com/forum/topic/8966-reading-fault-codes/ 1 Quote Link to comment Share on other sites More sharing options...
Question
Butcher
Engine light came on today. No apparent problems with the car. Just the light of ever-lasting uncertainty in the dash.
How do I check for fault codes and stuff? Had a quick look but I can't see any guides on here.
Link to comment
Share on other sites
6 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.