Krzys Posted August 11, 2015 Share Posted August 11, 2015 Awesome! Well worth doing too! Quote Link to comment Share on other sites More sharing options...
KiNK43 Posted August 11, 2015 Share Posted August 11, 2015 Awesome good addition for sure. Bleeding brakes is no fun whatsoever. Especially on ya tod Quote Link to comment Share on other sites More sharing options...
3gdean Posted August 14, 2015 Share Posted August 14, 2015 nice one! fancy doing mine...its a job i keep getting round to... Quote Link to comment Share on other sites More sharing options...
snakey135 Posted August 14, 2015 Share Posted August 14, 2015 Great work mate... Brakes are definitely something I need to invest in over the coming months, looking for a new disc pad n hoses setup but still doing research! (I.e waiting for funds! Lol)What's the difference with dot 5.1 and dot 4? ... We got dot4 at work, am I ok using that? Quote Link to comment Share on other sites More sharing options...
wantone Posted August 16, 2015 Author Share Posted August 16, 2015 @snakey135Only difference is boiling point, I only used the dot 5.1 because i got some free with my brake discs Shame i had to buy another 2 liters to bleed the barstuard! I can thoroughly recommend mtec grooved disc's, stoptech pads and hel braided hoses. Mine stops pretty dam well with this set up, only downside is the pads are a little dusty compared to my old redstuff pads but i can live with that @3gdeanIts probably easier than you think fella, only ball ache is bleeding them! Quote Link to comment Share on other sites More sharing options...
wantone Posted August 17, 2015 Author Share Posted August 17, 2015 I didn't think you could mix dot4 and dot 5.1 Dot 4 and 5.1 mix just fine as they are both glycol-based, Its Dot 5 that cannot be mixed as its silicone based Quote Link to comment Share on other sites More sharing options...
KiNK43 Posted August 18, 2015 Share Posted August 18, 2015 I'd made that assumption too. Will whack some 5.1 in mine too then. Quote Link to comment Share on other sites More sharing options...
wantone Posted September 5, 2015 Author Share Posted September 5, 2015 Not much of an update but decided to pay a little attention to my MC2 as been spending most of my time working and sorting the 200sx. Decided to fit some carbon wrap to my grill to get rid of the chipped red H and matt black surround, Tidy's it up quite well. Quite like it 1 Quote Link to comment Share on other sites More sharing options...
wantone Posted September 7, 2015 Author Share Posted September 7, 2015 Was having a bit of an "issue" with it hesitating under part throttle and feeling a little down on power.This was going on for a couple of weeks so did some searching on here and lambda sensor kept popping up.Ordered a new one off H-Tune last week then the day it arrived my check engine light came on... but the hesitation stopped!I tried pulling a fault code but came back with nothing!So, finally got around to fitting the new sensor last night, what a bitch of a job! Sorted it right out though, no more warning light, no hesitation and it feels faster than it has for a while!Forgot to take any pics as it was a right royal pain in the a*s.... 1 Quote Link to comment Share on other sites More sharing options...
Krzys Posted September 7, 2015 Share Posted September 7, 2015 Glad to hear you sorted it! Pain in the backside these sensors are! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.