Krzys Posted July 16, 2014 Share Posted July 16, 2014 Yea i know what your saying, I'll get the fuelling checked when i get it on the rollers but it doesn't feel like it needs a remap to be honest... Might just put the funds towards a S300 and a wideband kit then i can do it myself Yeah see what the dyno shows then go from there! 1 Quote Link to comment Share on other sites More sharing options...
Grant Posted July 16, 2014 Share Posted July 16, 2014 Would be worth a map .. But i ran my EK with your setup without and it was fine .. Will be running the deck the same .. long old job too isnt it ! Did you manage to get all the vac hoses etc in first time? I had issues with idle on mine when i did it ! Quote Link to comment Share on other sites More sharing options...
wantone Posted July 16, 2014 Author Share Posted July 16, 2014 Would be worth a map .. But i ran my EK with your setup without and it was fine .. Will be running the deck the same .. long old job too isnt it ! Did you manage to get all the vac hoses etc in first time? I had issues with idle on mine when i did it ! It has a htune basemap at the mo, pulls like a train so not knocking it. Had to do a few "modifications" on the vac hoses, got some proper ones on order now. The biggest issue i had was the wire for the IAC plug was too short so had to extend it somewhat, that was after i tried starting it forgetting it wasn't plugged in... Thought i'd broke it! Would fire up and die straight away Quote Link to comment Share on other sites More sharing options...
Grant Posted July 16, 2014 Share Posted July 16, 2014 It has a htune basemap at the mo, pulls like a train so not knocking it. Had to do a few "modifications" on the vac hoses, got some proper ones on order now. The biggest issue i had was the wire for the IAC plug was too short so had to extend it somewhat, that was after i tried starting it forgetting it wasn't plugged in... Thought i'd broke it! Would fire up and die straight away Yeah they're not easy to get right! When you say ordered some, do you mean you've ordered a kit or just some lengths of hose? I remember that wore being slightly short lol. Bet that had your heart in your mouth though when it wouldn't start! Lol Quote Link to comment Share on other sites More sharing options...
wantone Posted July 20, 2014 Author Share Posted July 20, 2014 Hmm, well after a few days of running one of my injector seals has sprung a leak... Knew i should of replaced the seals instead of reusing my old ones Honda want to do me with no Vaseline for a whole set of new ones, Anybody know where i can get a replacement seal kit? I've seen this one - http://mrinjectoruk.co.uk/seal-kit-14-Keihin-Honda-P1720681.aspx# but i'm not sure if that's the one i need!? Any advice greatly appreciated. Yeah they're not easy to get right! When you say ordered some, do you mean you've ordered a kit or just some lengths of hose?I remember that wore being slightly short lol.Bet that had your heart in your mouth though when it wouldn't start! Lol Just ordered some lengths of hose and yea i shat my pants when it wouldn't fire up first go! Quote Link to comment Share on other sites More sharing options...
Grant Posted July 20, 2014 Share Posted July 20, 2014 Where is it leaking from mate? the small o rings or the fat chunky ones? Quote Link to comment Share on other sites More sharing options...
wantone Posted July 20, 2014 Author Share Posted July 20, 2014 Where is it leaking from mate? the small o rings or the fat chunky ones? Not sure, its leaking from the top where the fuel rail attaches. Quote Link to comment Share on other sites More sharing options...
noodels Posted July 21, 2014 Share Posted July 21, 2014 looking good Quote Link to comment Share on other sites More sharing options...
Grant Posted July 21, 2014 Share Posted July 21, 2014 Sounds like its the tiny ones then mate .. What i did for mine, is buy a multi box of fuel resistant o-rings and found one that fits ! You dont need to buy the whole set ! IIRC the fuel resistant ones are green 2 Quote Link to comment Share on other sites More sharing options...
wantone Posted July 21, 2014 Author Share Posted July 21, 2014 Cheers for the info The guy from Mr injector uk got back to me and confirmed that the above link is the correct kit for our cars so i've ordered one of those.May aswell replace them all while i'm at it Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.