simpo Posted October 21, 2011 Share Posted October 21, 2011 i want another one now.looking good rich still cant get over how much you paid for this i am so jealousYou say that but i have had loads of people that come to my unit say that im made for paying anything for the car and all it good for is the scrap yard . but they will all eat there words when she is done .Rich.they aint got a clue mate i have had loads of these civics and they are prob one of the best civics made imo. if it wasnt for the problems of rust then i would still have one now. once its all done and sprayed up you could prob sell it for 2k + Link to comment Share on other sites More sharing options...
civicturbo79 Posted October 21, 2011 Author Share Posted October 21, 2011 Well not that much done today but it was a funny bit to do and it took alot of time and making several section to complete the bottom corner of the arch .Rich. Link to comment Share on other sites More sharing options...
chrismb6 Posted October 22, 2011 Share Posted October 22, 2011 looks realy good the work your doing it will be worth it when its finished Link to comment Share on other sites More sharing options...
james Posted October 22, 2011 Share Posted October 22, 2011 good skill you have there rich Link to comment Share on other sites More sharing options...
civicturbo79 Posted October 22, 2011 Author Share Posted October 22, 2011 well i had a full day the the car today and i got alot done today i started off by finishing the back edge of the arch off like the other side i did yesterday . Then i cut in the section of sill i was replacing , clean all the old sill off which gave me a nice gap to repair the inner sill around the jacking point .Then i made the plates for the Strengthening inner panels and i welded them up too. After that i could weld in my section of sill panel Thats almost one side complete now i just have to make some plates for the inner arch and get them welded in .Had to see what took 7 hours from the pictures but making the plates up for the panels i cannot buy takes the time . Rich. Link to comment Share on other sites More sharing options...
civicturbo79 Posted October 22, 2011 Author Share Posted October 22, 2011 looks realy good the work your doing it will be worth it when its finishedThank you . Rich. Link to comment Share on other sites More sharing options...
civicturbo79 Posted October 22, 2011 Author Share Posted October 22, 2011 good skill you have there richThank you they have served me well over the years . Rich. Link to comment Share on other sites More sharing options...
dr_broon Posted October 22, 2011 Share Posted October 22, 2011 awsome work Rich mate Link to comment Share on other sites More sharing options...
simpo Posted October 23, 2011 Share Posted October 23, 2011 looking good rich. glad to see someone doing this properly and not just fibre glassing and fillering it Link to comment Share on other sites More sharing options...
james Posted October 23, 2011 Share Posted October 23, 2011 Qxtf3_IHTfs La1TABMyI7w your civic + a Civic Wagovans transmission, axles, driveshaft, viscous coupling, rear differential and subframehttp://www.realhomemadeturbo.com/forum/ ... opic=533.0 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.