kyekye09 Posted March 8, 2013 Share Posted March 8, 2013 I tried to make a air filter shield and it was a complete fail I couldn't get the shape right or anything.. Again top work! That should make quite a difference.. i was the same bud.... even tried those ebay clip under things.... it was cr4p so binned it Quote Link to comment Share on other sites More sharing options...
Raz s Posted March 8, 2013 Author Share Posted March 8, 2013 this Was abit tricky with all the bends, Your best bet is to make it outta cardboard first, make sure it fits then transfer it to metal (like in the first pic) and take your time of course . Yeh it might make a little difference once its all finished and the lid put on. Quote Link to comment Share on other sites More sharing options...
kyekye09 Posted March 8, 2013 Share Posted March 8, 2013 colder air will make a difference Quote Link to comment Share on other sites More sharing options...
Raz s Posted March 8, 2013 Author Share Posted March 8, 2013 So i have read. Got a fair few more mods to reduce intake temp coming pretty soon too Quote Link to comment Share on other sites More sharing options...
kyekye09 Posted March 9, 2013 Share Posted March 9, 2013 tb coolant bypass is a good way ive been told... i have done both the d16 mc1 and the wifes b18 mc2 you can get thermo intake/inlet gaskets aswell for most D's and B'scold air feeds the list goes on and looks like you know yor stuffi will be sure to keep an eye on this one Quote Link to comment Share on other sites More sharing options...
EmZvr Posted March 9, 2013 Share Posted March 9, 2013 Nice work mate. Now with a top on it and if you put some insolation on the box it will be perfect Quote Link to comment Share on other sites More sharing options...
knight Posted March 9, 2013 Share Posted March 9, 2013 Amazing work mate!!! you have skills!!!! Quote Link to comment Share on other sites More sharing options...
noodels Posted March 9, 2013 Share Posted March 9, 2013 nice work there is a rubber on the bonnet it that area, try removing That b4 boxing it in and put a seal on the edge of the sheild to seal against bonnet when closed Quote Link to comment Share on other sites More sharing options...
KiNK43 Posted March 9, 2013 Share Posted March 9, 2013 Love the airbox mate. Would like something like that but wouldnt know where to start Quote Link to comment Share on other sites More sharing options...
NIKH25 Posted March 9, 2013 Share Posted March 9, 2013 Great work on the shield mate. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.