scottravenhill Posted April 16, 2013 Share Posted April 16, 2013 sounds similar to what mine did after it stood for ages, except it went bang when it cut out. we tried the relay which did have dry joints but no luck Quote Link to comment Share on other sites More sharing options...
mark11 Posted April 17, 2013 Author Share Posted April 17, 2013 is it that big grey one ? Quote Link to comment Share on other sites More sharing options...
spudley1988 Posted April 17, 2013 Share Posted April 17, 2013 Yea mate big grey one in drivers fotwell area Quote Link to comment Share on other sites More sharing options...
mark11 Posted April 17, 2013 Author Share Posted April 17, 2013 cheers mate will take that and look later thanks Quote Link to comment Share on other sites More sharing options...
spudley1988 Posted April 17, 2013 Share Posted April 17, 2013 No worries mate hope you get her back up and running soon Quote Link to comment Share on other sites More sharing options...
scottravenhill Posted April 18, 2013 Share Posted April 18, 2013 its in the bottom of footwell to the right of your accel pedal, bolted to the trim. easier to split the relay if you remove the bolt and take t all out first. make sure you have a really high power soldering iron, a lot of patience coz 15 year old rusty solder is tough!!! although this didnt cure mine, best of luck. Quote Link to comment Share on other sites More sharing options...
mark11 Posted April 19, 2013 Author Share Posted April 19, 2013 should i get arm and dizzy from honda u think or blueprint ones for half the price ? Quote Link to comment Share on other sites More sharing options...
NIKH25 Posted April 19, 2013 Share Posted April 19, 2013 Try John Banks trader on here if you go for genuine Honda, good discounts. Quote Link to comment Share on other sites More sharing options...
KiNK43 Posted April 20, 2013 Share Posted April 20, 2013 You replacing whole dizzy? People say bad things about aftermarket dizzys. But I have been using one that cost me 70 brand new for about 20k miles and its fine. Engine even dynoed bang on the same.but maybe I've just been lucky Quote Link to comment Share on other sites More sharing options...
mark11 Posted April 20, 2013 Author Share Posted April 20, 2013 tried john banks for dizzy cap it was £29.28 and for the rotor arm its £22.29 same price as my loacal honda garage but priced a clutch off him was a lot cheaper.Got blueprint rotar arm and dizzy cap for £32.00. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.