baz_ctr Posted August 17, 2013 Share Posted August 17, 2013 Hi Guys new on here hi to you all we have a MB1 1997 1.6 we are setting up for trackdays upgraded part we think required for doing trackdays but when we came to putting a rear arb bar on ( as it haven't got one) there are no mounting points on chassis for it and also what rear arb would you use mgzs? all replies appreciated cheers Quote Link to comment Share on other sites More sharing options...
simpo Posted August 17, 2013 Share Posted August 17, 2013 Have you had a good look? As when I did my deck the holes were clogged up with cr4p! You can use standard mb6 one or mgzs which is thicker Quote Link to comment Share on other sites More sharing options...
noodels Posted August 17, 2013 Share Posted August 17, 2013 different point to ek ect on the rails longitudal not across the car, as above Quote Link to comment Share on other sites More sharing options...
baz_ctr Posted August 18, 2013 Author Share Posted August 18, 2013 Have you had a good look? As when I did my deck the holes were clogged up with cr4p! You can use standard mb6 one or mgzs which is thickerYeah had the car up on car lift and had good look no mounting points on chassis which we thought was very strange, also we are now running dc2 eye type rear lca because we are running type r suspension, it also has crazy oversteer in the wet mid corner Quote Link to comment Share on other sites More sharing options...
KiNK43 Posted September 6, 2013 Share Posted September 6, 2013 Should defo have the holes there. There on the rear chassis legs not on the subframe as on other civics. Strange my mate had an mb1 and that came with rear arb already fitted. Quote Link to comment Share on other sites More sharing options...
baz_ctr Posted September 14, 2013 Author Share Posted September 14, 2013 Should defo have the holes there. There on the rear chassis legs not on the subframe as on other civics. Strange my mate had an mb1 and that came with rear arb already fitted.You don't have photo of standard arb fitted to mb so I can see where it is mounted because where the arb is mounted on other model civic's and integra's is where I expected it to be and there's where I looked Quote Link to comment Share on other sites More sharing options...
KiNK43 Posted September 14, 2013 Share Posted September 14, 2013 2 Quote Link to comment Share on other sites More sharing options...
baz_ctr Posted December 3, 2013 Author Share Posted December 3, 2013 thanks for that haven't been at the car in while with trackdays finishing up but going to go looking for this over new few weeks thanks again Quote Link to comment Share on other sites More sharing options...
baz_ctr Posted December 5, 2013 Author Share Posted December 5, 2013 right some going to be looking for the roll bar and all brackets & mountings (as we have nothing there for the roll bar to be fitted too) plus the little under brace too anybody got them and willing to send to Dublin,Ireland Quote Link to comment Share on other sites More sharing options...
EmZvr Posted December 5, 2013 Share Posted December 5, 2013 The little under brace doesn't fit mate ! You need a brace with different attachment, like this Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.