noodels Posted April 28, 2014 Share Posted April 28, 2014 Brings back memories Quote Link to comment Share on other sites More sharing options...
Krzys Posted April 28, 2014 Share Posted April 28, 2014 Someone recently asked how easy it was to split the clear plastic off the clocks...Not very, you can't pry it off/ warm it up, I suggest using a blade.What have you got planned for it? Quote Link to comment Share on other sites More sharing options...
3gdean Posted April 29, 2014 Author Share Posted April 29, 2014 What have you got planned for it?going to paint it granada black with the rest of bits,,,, ive taken all the chrome off the car.........to be adding some to the dials 1 Quote Link to comment Share on other sites More sharing options...
3gdean Posted April 29, 2014 Author Share Posted April 29, 2014 JDM lights "> ">http://s749.photobucket.com/user/dean_wilcox89/media/Mobile%20Uploads/4422CD47-BF26-466A-B67E-3B5E58F7BB1F.jpg.html'> headlights split awaiting paint (alot easier to do than expecting) Quote Link to comment Share on other sites More sharing options...
Grant Posted April 29, 2014 Share Posted April 29, 2014 Do you know i think i was being completely stupid .. I didnt think you could do this with a deck! I need it done! now ! Any chance of a how too? 1 Quote Link to comment Share on other sites More sharing options...
Krzys Posted April 29, 2014 Share Posted April 29, 2014 Do you know i think i was being completely stupid .. I didnt think you could do this with a deck! I need it done! now ! Any chance of a how too?It's easy mate, you need a pair of tail light bulb holders with wiring and for the above set up which I have the same, just join the same coloured wires together, remove the reverse light bulb and put the fog in that spot with a red bulb on it! On the holder for the top stop/tails I used a Stanley blade to shave the small line off the side as it stops the holders going in, the two main locks are enough to hold them in! 1 Quote Link to comment Share on other sites More sharing options...
Grant Posted April 29, 2014 Share Posted April 29, 2014 It's easy mate, you need a pair of tail light bulb holders with wiring and for the above set up which I have the same, just join the same coloured wires together, remove the reverse light bulb and put the fog in that spot with a red bulb on it! On the holder for the top stop/tails I used a Stanley blade to shave the small line off the side as it stops the holders going in, the two main locks are enough to hold them in! I feel an visual demonstration is needed next weekend mate Quote Link to comment Share on other sites More sharing options...
Krzys Posted April 29, 2014 Share Posted April 29, 2014 I feel an visual demonstration is needed next weekend mate No worries mate! 1 Quote Link to comment Share on other sites More sharing options...
Grant Posted April 29, 2014 Share Posted April 29, 2014 No worries mate! Just of the lights though! Ha Quote Link to comment Share on other sites More sharing options...
Krzys Posted April 29, 2014 Share Posted April 29, 2014 Just of the lights though! Ha Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.