3gdean Posted April 11, 2014 Author Share Posted April 11, 2014 Oh it happened...just not quite what I want yet... Easy fixes.It's in one piece and I manged to get work on time barely,,, needs fettling/ adjustment tomorrow, wasn't quite as bolt on n go as I intended. Quote Link to comment Share on other sites More sharing options...
Krzys Posted April 11, 2014 Share Posted April 11, 2014 It's been raining shocks and springs! Quote Link to comment Share on other sites More sharing options...
NIKH25 Posted April 11, 2014 Share Posted April 11, 2014 Good job James isn't here so much anymore, no axle stands? Oh it happened...just not quite what I want yet... Easy fixes.It's in one piece and I manged to get work on time barely,,, needs fettling/ adjustment tomorrow, wasn't quite as bolt on n go as I intended. What's the problem? Quote Link to comment Share on other sites More sharing options...
3gdean Posted April 11, 2014 Author Share Posted April 11, 2014 It's not equal in the slightest. Drove work hoping the suspension would settle better, just made it worse, front is way to low with its arse in the air. Thought with these shocks and springs it were meant to be the other, low on the back.Couldn't drive it with the black wheels on atall major scrapping so had to swap back to standards to get work.Fixes are going to be swap the front cups for the originals about 5mm difference, or dig out my lude ones and see what the difference is there.Will be elongating the rear shock holes/ re drilling and welding to give about an 8mm difference.I don't really want to post a pic in its sorry state. Quote Link to comment Share on other sites More sharing options...
NIKH25 Posted April 11, 2014 Share Posted April 11, 2014 It's possibly due to the fact the springs were for a d16 engined car, so the extra weight on the front is making it sit lower. 1 Quote Link to comment Share on other sites More sharing options...
3gdean Posted April 11, 2014 Author Share Posted April 11, 2014 On another note here's some filthy pics...Dirty girlNo sea lifeJust the one replaced... Win!There's no such thing as too much!Not looking too clever, cv boots has just gone aswell, time for a new shafting. Quote Link to comment Share on other sites More sharing options...
3gdean Posted April 11, 2014 Author Share Posted April 11, 2014 ^^^ mg zs180 set up with 30mm drop eibach springs Quote Link to comment Share on other sites More sharing options...
3gdean Posted April 11, 2014 Author Share Posted April 11, 2014 Is there a dislike button,,, pay attention sir pays no attention esq.Do I have to have 200 posts for this phrase? Quote Link to comment Share on other sites More sharing options...
Krzys Posted April 11, 2014 Share Posted April 11, 2014 Generally I decide Quote Link to comment Share on other sites More sharing options...
3gdean Posted April 11, 2014 Author Share Posted April 11, 2014 It could be you...(big pointy finger)No doesn't seem right, I was following a copper all the way work and couldn't test it out,,, it's definately stiffer and ... No body roll, think it's going to be sweet.Will give a good test on the way home, it's getting driven in anger, nothing in the back aswell, light weight yo! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.