Darren-mc2 Posted July 13, 2014 Author Share Posted July 13, 2014 Ah yer sorry . It's got a japspeed manifold and powerflow exhaust with de-cat and induction kit . Quote Link to comment Share on other sites More sharing options...
Dougie Posted July 14, 2014 Share Posted July 14, 2014 ive got a mongoose decat-back on mine with the standard manifold and you can definatly hear it on mine, you hear a change in noise with both the vtec and iab's but you feel more of a kick in the power when you get to 6k and the iab's come into playmy guess is that the ECU is making more of a difference than you realise, it could be that the vtec crossover is set at a different point on your p30 or that the iab's are dissabled so you are getting the full whack when the vtec engages Quote Link to comment Share on other sites More sharing options...
Darren-mc2 Posted July 14, 2014 Author Share Posted July 14, 2014 I can hear it engage and I then hear the iabs open but it is no where near the vti-s I've driven . I'm wondering if a ecu reset would improve things I dissconnected the battery before but noticed a post the other day about a sequence or something . Quote Link to comment Share on other sites More sharing options...
Darren-mc2 Posted July 14, 2014 Author Share Posted July 14, 2014 Thanks for that Tom I'll give a go . Quote Link to comment Share on other sites More sharing options...
Dougie Posted July 14, 2014 Share Posted July 14, 2014 an ecu reset is worth doing every once in a while anyway 1 Quote Link to comment Share on other sites More sharing options...
Jayhoath83 Posted July 17, 2014 Share Posted July 17, 2014 Ive had this n when i changed the solinoid gasket and did an ecu reset it felt healthier n vtec was a little stronger it might help if not then you might need a new solinoid Quote Link to comment Share on other sites More sharing options...
Darren-mc2 Posted July 17, 2014 Author Share Posted July 17, 2014 I done an ecu reset but feels the same to be honest I think it's because I have such a big rear silencer it's powerflow but it's definetly restricting the noise because it's pretty quiet and it's a 2.25 system . Quote Link to comment Share on other sites More sharing options...
simpo Posted July 18, 2014 Share Posted July 18, 2014 Where did u get the ecu map? Don't say H-tune 1 Quote Link to comment Share on other sites More sharing options...
Darren-mc2 Posted July 18, 2014 Author Share Posted July 18, 2014 For my Ek yes I got a c4 base map from h-tune with the intention of remapping .. But tbh with the mods I have the base map is working well . I don't understand all the negative comments about h-tune mine works and it works well and it is only suppose to be temperary . Quote Link to comment Share on other sites More sharing options...
Krzys Posted July 18, 2014 Share Posted July 18, 2014 I wouldn't be surprised if the people who had problems needed to get their cars mapped properly but were too tight to do it and expected too much from a base map that isn't even done live to match the car.If you're happy with it and it works well then that's all good. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.