Engy Posted November 26, 2014 Share Posted November 26, 2014 Heater fan seems to be working fine but just no balls!!!! Quote Link to comment Share on other sites More sharing options...
0 Krzys Posted November 28, 2014 Share Posted November 28, 2014 On 11/28/2014 at 11:14 AM, feck_on_a_stick said: Mine has gone like this as well, but screetches at all speeds. I'd changed the pollen filter a few months ago and also bough a new resistor. I just need to find some time over the next few weeks to take a closer look. I take it the heater blower is just behind the glove box below the resistor?Yeah I think it's in that sort of area! If the fan works on all speeds it won't be the resister, either the filter or the motor itself I suspect. 1 Quote Link to comment Share on other sites More sharing options...
0 Dave Posted November 26, 2014 Share Posted November 26, 2014 Hi mate, do you mean the amount of air coming out of it is poor? no force in it? If so, it will most likely be the pollen filter needing changed Is it working on all speed setings? Quote Link to comment Share on other sites More sharing options...
0 Ryan6926 Posted November 26, 2014 Share Posted November 26, 2014 Yip I'd suggest pollen filter replacement, They're only about 6 quid from Euro car parts 1 Quote Link to comment Share on other sites More sharing options...
0 Jayhoath83 Posted November 27, 2014 Share Posted November 27, 2014 Yeah defo more info needed there dude is it a weak fan or weak temp as that can be bad Quote Link to comment Share on other sites More sharing options...
0 Ryan6926 Posted November 27, 2014 Share Posted November 27, 2014 My heaters are weird too, Outer vents warm up nicely and get hot but middle 2 are only cool air at best in the 2 above the stereo, Not sure that's normal (Sorry for hijack) Quote Link to comment Share on other sites More sharing options...
0 Dave Posted November 27, 2014 Share Posted November 27, 2014 Ryan theres a button on them for allowing only cold air to the middle vents. Think if it's up the way it's on cold, or other way around Quote Link to comment Share on other sites More sharing options...
0 Ryan6926 Posted November 27, 2014 Share Posted November 27, 2014 I've tried both doesn't seem to make much odds, Oh well not a massive thing was just confused about it Quote Link to comment Share on other sites More sharing options...
0 Dave Posted November 27, 2014 Share Posted November 27, 2014 hmm, sounds like the wee flap at the heater isnt working as it should and allowing a mix of cold/warm air to the centre vents all the time. Do they go cold when the wee button is set to cold air only on them? 1 Quote Link to comment Share on other sites More sharing options...
0 Ryan6926 Posted November 27, 2014 Share Posted November 27, 2014 They go fairly cold I think yeah, I don't like cold air I like to be warm so I don't usually have them on if I can help it as long as I've got warm hands off my drivers side vent I'm ok lol Quote Link to comment Share on other sites More sharing options...
0 Dave Posted November 28, 2014 Share Posted November 28, 2014 sounds like it could be that flap in the heater itself, the one for controlling the centre vents. Not sure if there's also a rubber seal around the pipe where it connects to the actual vents, could be that thats gone awol Quote Link to comment Share on other sites More sharing options...
Question
Engy
Heater fan seems to be working fine but just no balls!!!!
Link to comment
Share on other sites
19 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.