Leaderboard

when getting the steering wheel grab the airbag/horn ring with all wires and the 4 screws for ring pink wire and white wire are not needed. green wire is horn . red/yellow wire and red wire are for airbag before staring disconnect battery t30 star key to take airbag off unplug airbag and horn and earth wire make shore steering wheel straight 19 mm socket to undo center nut and take column cover off 3 philips screws then there 3 philp screws holding on airbag/horn ring on honda horn wire is red join to mg green wire airbag honda yellow wire to mg red wire and honda green wire to mg red/yellow wire do not solder with airbag plugged in as the heat can set it off put mg airbag ring on column screw 4 philips in. plug wire in. put column cover back on. put steering wheel on. plug airbag and horn in all in and working and srs airbag light is off but dont no if it will work in a crash and i'm not gonna crash it to test that part this is a guide so you will bee doing this at your own risk

I actually do think bronze UL48s are in the running right now. If anyone has any suggestions for 15x9 ET0 (or as close) in 4x100 I'll happily take them into consideration. Looking for dish though.

no problem i thought it was different and never seen it done on a civic M so thought i would try it

if your on about the scuttle @Finch its dipped

Just be like @dogg1210 and change the colour weekly

Oooo... Didn't realise that the mg wheel fitted. Nice one chief

they do look really cool, would be cool the front end on a deck