Leaderboard

Fitted a Bride Low Max last week, certainly lives upto its name! Feels like driving a go kart now! Was originally going to use the MB rails and modify them to fit, but the effort really wasn’t worth it for me. A lot of cutting, butchering and welding was needed so instead I bought M2 EK rails which almost lined up. The front two tabs line up fine, but the rear right tab is too far back so would need grinding off and welding just a little further forward, and the rear left tab grinding off and welding a little further forward also. However, I didn’t do this as I didn’t have access to a welder. So for the right side I used a long bolt that can reach through to gap and secure it tightly. Had to file a small amount of metal on the top side of the bolt hole on the rails to allow the the angle of the bolt. And the left side I drilled the rail tab out a little further infront of the original hole on the tab. Everything fits snugly and is all tight and secure with no movement, ordered a harness too so will attach that when it comes. Just have the other side to do now…..ahaha. But in hindsight I think I’ll be grinding the tabs off and welding them instead of messing about so much!