10000rpm

Been a little busy lately but got all the engine harness done. Cleaned up all the rusty hose clamps Managed to get a AEM fuel Rail with inline fuel filter Gathering all the bits coolant hoses, spoon sports torque damper, mishimoto reservoirs and AN fitting for fuel line/filter tuck Aluminium Radiator and fan shroud Flushed and flaked rocker cover Throttle body and intake ,manifold powder coated black New summer wheels Sprint sw96 ET42 testing loads more to come Thanks

its actually a jdm b18c, originally with 200 ponies. internally will be left alone with breather mods to support.

Dude get some non vti Foglamp inserts and drill your own holes and get them to sit flush. Looks ace with new wheels.

Nengun and RHD JAPAN. I have used both in the past successfully.

+1 THAT I personally find it easier to sit the gasket in the rocker cover, a bit of sealant on cam cutouts then place the rocker cover on to the head.

It sure is. Thanks for the comments.

After some thinking, we thought why not Flush the engine bay and do a wiretuck as the EG turned out awesome and we enjoyed doing it. I wanted to fit a type r head later this year, but got a absolute deal for a complete car so why not eh' drop the full engine in. couldn't really have been a better time. Engine out of Donor Car Cleaned the engine and started to spray it all to freshen things up (NAZ doing his thing) All done, looks a million times better Bought a Timing belt kit and thermostat from Honda All fitted and timed up Engine Harness originally IN Progress Loads more to come InshAllah

Nice. The new wheels looks ace. Just keep an eye on the nuts.

I havnt fitted the teg wheels just wanted to see what they look like. I have fitted the old wheels on for now. Hopfully once I get the car back il try the wheels on again and see clearance if it rubs then they will be up for sale. The Impreza will be up for sale soon the new owner wont be dissapointed with it pulls nice and strong

Been mega busy recently only just got chance to upload the pictures Power steering system removed Thoughts on these wheels S2k clusters fitted Had the car out for a short while over the weekend. Dropped the Car of at the bodyshop on Monday am hoping to have it back today.

Lol 😂Here's how I find it easier to do Put window down 1) Pull seal out 2) Remove doorcard 3) Remove plastic waterproofing wrapper 4) Remove the quarter glass frame/bar Has a screw under the door seal at the top and one on the door skeleton 5) Lower window until you can see the two 10mm bolts holding glass on to rail, whilst holding the glass remove the 10mm bolts. 6) Pull the glass out 7) Now the quarter glass can be pulled out to. fit in reverse, DON'T over tighten the two 10mm bolts, just firm. spray wd40 or gt85 down the tracks and slide the rubber in last it will go. Been a while since I have done one, I think thats everything Hope that helps

LoL dont need the gym your working more muscles working in the garage. It was just a pain turning at low speed with the diff clunking and no power steering for me its a no no its much better with it.

I have a teg rack fitted and it's a lot better then the stock eg one.

Yeah it does clunk at low speed I think if I didn't have the 1.5 way diff it would have been fine with no power steering.

Lol will upload pics soon just locked up now. The car will be a daily I think with it having a 1.5 way diff the steering was a bit funny on low speed not something I could livr with.

Afternoon people had some more free time I removed the power steering but I didnt like the drive without it so refitted it. Also fitted the s2000 clusters today. The car is going back into the bodyshop monday rear wheel caught the arch and cracked the paint. I have all the paperwork for the plate just need to send it of to dvla so they can tranfer it onto the car. Pics to follow

Did a quick edit to see what it will look like with the plate on

Got it one B18 EGT it is

LoL almost there :grin:

LoL so far Krzys has been the closet Its B18 _ G _ fill in the missing letters lol. I searched for months for different plates most were not available so I had to go with the one I have got Complete power steering setup removed and line looped for rack looks so much better

LoL video will be put up soon just waiting for couple more things then I will be taxing it towards the end of the month. Beleive it or not I have only driven the car in the yard and thats it. I wanna complete it fully before its back out on the road. Things to do waiting for New private plate to come. Anyone guess what it could be lol Decided to remove the complete power steering setup doesnt look good in the bay might do this today if I get some free time New tires for the front fit s2000 clusters change back box

Lol what would this be then?

Thanks people for the nice comments a few more changes to be made yet

Some good entries again. Voted

Fitted skunk2 cam cover washer kit Catch can bracket made & refitted Give it a wash love snow foam As it stands now Comments welcome