m0l0t0v Posted November 14, 2016 Share Posted November 14, 2016 So, I more than likely need to change pretty much most of the bushing son the car. I know the busing on the rear lca's are pretty much fubar so want to replace them asap and then have a look at the others. Am I right in thinking that these will fit but are also considered to be pretty good in terms of stiffening the chassis up, etc? Pros and cons? http://www.tegiwaimports.com/select-car/honda/eg/suspension/energy-suspension-hyper-flex-poly-bush-kit-civic-eg-92-95.htmlhttp://www.tegiwaimports.com/select-car/honda/eg/suspension/energy-suspension-hyper-flex-poly-bush-kit-civic-eg-92-95.html Using mg zs shocks with oem lcas and eibach springs... If there's somewhere I could buy the bushing for the lca alone that'd be great but wouldn't be surprised if buying them from Honda would be almost as much as the entire kit linked? Sorry for the masses of posts lately... Just want to make sure I do things right Oh and if someone could point out to me where to buy an input shaft bearing for my civic that'd be great... Other than ringing Honda up. Oh and I remember reading somewhere that they have to be black otherwise it wouldn't pass an mot? Is that correct? Quote Link to comment Share on other sites More sharing options...
Finch Posted November 14, 2016 Share Posted November 14, 2016 H-Tune keep a full D-series gearbox rebuild kit (bearings, seals etc) made by Synchrotech iirc Your best bet is a DC2/EG civic bushing kit or the bushings for said cars to fit OEM style Quote Link to comment Share on other sites More sharing options...
m0l0t0v Posted November 14, 2016 Author Share Posted November 14, 2016 This? https://h-tune.co.uk/synchrotech-transmission-bearings-seals-kit/ So the above bushing kit would definitely fit? £300 on bearings and bushings Quote Link to comment Share on other sites More sharing options...
Finch Posted November 14, 2016 Share Posted November 14, 2016 As far as I know, the D15 ones, D16 (apart from ZC DOHC) are all the same. Have you tried local motor factors off a reg though, might be a cheaper option? Though that lists "D15" as all one category ? Quote Link to comment Share on other sites More sharing options...
m0l0t0v Posted November 14, 2016 Author Share Posted November 14, 2016 I haven't... But I guess since this car has done quite a bit of mileage replacing all the bearings isn't a bad idea... Quote Link to comment Share on other sites More sharing options...
Chandler Posted November 16, 2016 Share Posted November 16, 2016 If you want bush. Get yourself over to strongflex uk. Type it into google. Should be the first one that comes up. Takes about 5 days to arrive but are much cheaper than most places. I've got a few of them on my car. Also comes with more lube than other suppliers which makes it easier to install 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.