Krzys Posted May 24, 2014 Author Share Posted May 24, 2014 Yeah that's the worst offender! There was a small break (5-10 minutes) in the rain so I quickly went out and got the front calliper bolts undone, inspected the near side front that I could hear the squeal from, plenty of meat on the pads but a touch uneven wear! Link to comment Share on other sites More sharing options...
NIKH25 Posted May 24, 2014 Share Posted May 24, 2014 The outside pad definitely looks a lot thinner than the inside one but it's probably just been sticking for a little while. Link to comment Share on other sites More sharing options...
Krzys Posted May 24, 2014 Author Share Posted May 24, 2014 Yeah, there's a fair bit of corrosion on the pad side of the piston too! Be well worth getting it fully refurbed and that's the better one of the two that's playing up! 1 Link to comment Share on other sites More sharing options...
Krzys Posted May 25, 2014 Author Share Posted May 25, 2014 All off!Here's the worst offender!Here's how she'll sit now until parts arrive and the callipers come back.Hoping to get the projectors fitted in the week if I get decent weather! 2 Link to comment Share on other sites More sharing options...
KiNK43 Posted May 25, 2014 Share Posted May 25, 2014 Cool cool good stuff going down Link to comment Share on other sites More sharing options...
Krzys Posted May 25, 2014 Author Share Posted May 25, 2014 Fix it with a hammer!A mallet was used a fair bit to be honest! Link to comment Share on other sites More sharing options...
Grant Posted May 25, 2014 Share Posted May 25, 2014 Great work mate How long will she be in her new state of upliftedness?? Lol Link to comment Share on other sites More sharing options...
h4mza Posted May 25, 2014 Share Posted May 25, 2014 Like them wheels, might want to get myself a set. Link to comment Share on other sites More sharing options...
Krzys Posted May 25, 2014 Author Share Posted May 25, 2014 Great work mate How long will she be in her new state of upliftedness?? LolI'm expecting her to be hovering until next weekend at least, there's a stubborn pin stuck that needs heating to get removed so the callipers can be sent off, at that point it'll be the waiting game. Expected turn around is 2-3 days on that, plus waiting for everything else to turn up as well but I can get the new discs and braided lines fitted without the callipers. 1 Link to comment Share on other sites More sharing options...
KiNK43 Posted May 26, 2014 Share Posted May 26, 2014 I'm expecting her to be hovering until next weekend at least, there's a stubborn pin stuck that needs heating to get removed so the callipers can be sent off, at that point it'll be the waiting game. Expected turn around is 2-3 days on that, plus waiting for everything else to turn up as well but I can get the new discs and braided lines fitted without the callipers.Not the pin through the handbrake cable is it??? Ohhhh man that sucks. Link to comment Share on other sites More sharing options...
Recommended Posts