Paul_Batman Posted September 16, 2014 Author Share Posted September 16, 2014 been researching more about this h2b conversion and i really want to run recliners and harness's but looks like i'm going to lose rear seats =/ grr! also a h2b header (manifold) is not essential as you can heat up the stock h22 manifold and bend it down at the bend (works as few people do this) as it sits too high on the flange end. (eg/ek/dc2 reference) although it would be nice to get one but depends on what route i want to take when i get there. also the QSD oil pan looks sexy! but i will decide on that when i see clearance issues when its in as it costs $499 = £308 Toyo sports exhaust sounds lovely (also running a 4-2-1 stainless manifold with a resonated stainless decat) no rasp with a nice deep tone, but yeah it knocks like hell when its cold till i can add this 2" section in. i would recommend it for the tone but the clamp i got with mine was s**te and i bought a D clamp, its not long enough so needs extending and i did find out a lad i know had his centre section welded a few times due to it not being very thick and scraping on bumps (depends on how low your car is) i dont have access to a welder either *Update for VTI-S parts"Wing MirrorsQuickshift *Update for Deck Parts*Fanblade wheels with T1RsRocker CoverRear Trailing arms with new bushesJDM rear LCA's *Update for H2B Parts list (picking up next week)* S9BDriveShafts(i know i have these already on mine but will be better to have these so i can sell my engine as a full conversion ) 1 Quote Link to comment Share on other sites More sharing options...
Jayhoath83 Posted September 16, 2014 Share Posted September 16, 2014 Nice i might get one it depends on how my side exit idea goes as im having issues with wrong parts turning up at the mo lol 1 Quote Link to comment Share on other sites More sharing options...
Grant Posted September 16, 2014 Share Posted September 16, 2014 Moving in the right directoin mate !! 1 Quote Link to comment Share on other sites More sharing options...
Chandler Posted September 16, 2014 Share Posted September 16, 2014 wow nice list 1 Quote Link to comment Share on other sites More sharing options...
Chandler Posted September 16, 2014 Share Posted September 16, 2014 but 1 Quote Link to comment Share on other sites More sharing options...
Paul_Batman Posted September 16, 2014 Author Share Posted September 16, 2014 haha not much to take photo's of really guys, ill start a new album on Photobuket and ill keep adding my H2B parts into it Here are the Fanblades for the deck with near enough brand new T1r's on, got these for a bargain but in need of a refurb! Rocker cover for the Deck Trailing arms for the deck with new bushes and JDM lca's (ready for when i find some dc2 suspension fot it) 1 Quote Link to comment Share on other sites More sharing options...
Paul_Batman Posted September 16, 2014 Author Share Posted September 16, 2014 @Jay don't forget to check see you put all the bolts in your manifold if you do 1 Quote Link to comment Share on other sites More sharing options...
Jayhoath83 Posted September 16, 2014 Share Posted September 16, 2014 Dont worry about that dude im gonna order some flush fit ones to make her look sexy 1 Quote Link to comment Share on other sites More sharing options...
Paul_Batman Posted September 16, 2014 Author Share Posted September 16, 2014 i was reading your thread about the gearbox bolts lol have you got any pictures of what it looks like with flush fit bolts please? i'm intrigued! Quote Link to comment Share on other sites More sharing options...
Jayhoath83 Posted September 16, 2014 Share Posted September 16, 2014 I'll find em now for ya Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.