VTISmichael

hopefully ordering some sheet metal soon. Rear bumper fillered and rust free primed.

haha no way me and mate were chatting about venoms at japfest, getting rare now but gd work on the adapters!

Nope, i want full width tyre(widest 14" tyres i can get) and correct camber, i want all of the tyre on the road/track! I will be building sheet metal arches to cover them, gunna look badass Something like this..

Picked up these beasts today in stevenage, 14" x 8.5j rear & 9j front! Centre bores are 2mm to small so im going to machine them out, just need to make a jig to hold them. Quick mock ups, ive got a vision for the what the wide arches will look like gunna be maaad...

Rusty rear arch..

Decided to remove the rear arch plastic, dicscoverd quite a bit of rust on the inner lip and noticed the whole sill (drivers side) has been 'repaired'. Skimmed the bottom corner to reveal filler errgh! Gunna need cutting out soo.. Picking up wheels tomorrow, serious width on the way stay tuned!

Was at japfest yesterday, only 1 other stagea which was on the gtroc stand, same colour as mine but almost standard was good, met another person that had one and met a guy called mark & ian who had theirs in the car park so 4 in total lol Theres a all nissan show at rockingham in august, im going to try and get a stagea stand going see what happens After seeing some ppls cool roof racks think im gunna fit a rack with a custom build cage on top! and ordering a glass fibre kit to repair the bodykit this month

Welcome to the micra club lol 1 litres all the way!

MCM stickers came, MAAAD! Took the front bumper off and passenger headlight out as i wanted to check the fmic pipes for any leaks, many many cracked bits on the bumper, will have a go at diy glass fibre fixing it all, got alot to do, shirts and rear splitter need repairing!

Go pro vid coming very soon!

Bumper on, bit of painting done, need to get some filler soon start smoothing off areas..

It is now, just like the japs im making it up as i go along mate lol

All welded and grinded flat, just need a bigger drill and i can mount the indicators, a rub down and then paint!

Started making the indicator plates, not too bad ?

Done a bit on silvia today, removed the passanger door card, bolt the passenger seat, removed the ariel, removed the front bumper and raised the front and lowered the back too. Bolted the plate to the bottom of the beam, think im going to shave the corners in and fix the indicators to those side holes. Think ill bolt a oil cooler to the panel next to the rad

Went to change the oil today, i managed to make it even more JDM!

Been diggin in ebay for stickers... One for vtec yo! moments lol

Rs4 grill test fit, i like it, needs a bit of fitting and a complete re paint. Wipers fitted, took the front wheels off and the reducer rings werent on properly sorted now. Oh bled the rear brakes, blue brake fluid ??

Had the front wheel balanced today as i had a bit of steering wheel shake yesterday, i think the kid didnt put the rings on properly when put on the balancer gonna take them off again and check, also got some oil, 10w40 castrol edge and new filter. Oh decided to take the centre dash with the radio apart to see if there a AUX connection, soooo many wires lol!

Rs4 grill and wipers came!

Front coils fitted, just need to level out and lower the back a bit. Next is to see if i can get some polybush bar and make some custom bushings for the rest of the suspension! I have no idea if the cambers are right but drove ok so cant be too bad lol

Front shocks plated and welded, both have been drilled. I just have to hoefully pop into work to get a drill later to drill the tops and i can fit them! They need cleaning up and painting but will look better!

Moar stickers yes blud.

Yeap very lame the old recirc! Im on the look out for a bov, on my old s14 i got both effects, flutter from both filter and bov double pigeon! lol

Dug up some stickers as well! The intinal D one is actually a patch!