Krzys Posted August 6, 2015 Share Posted August 6, 2015 You sure your hubs are clean when fitting? Seems weird to warp them on the road.I love mtec discs last forever and work well for me.I'm using Mintex rear pads and nissin super street front.Braided hoses too.And to be honest they are serious. Like jeez Louise when go hard on the brakes.Yeah with my setup it's not often I have to really press the pedal hard but when I do stamp on it I get a reminder of how bloody good they are! Quote Link to comment Share on other sites More sharing options...
Grant Posted August 6, 2015 Share Posted August 6, 2015 ordered a set of apec disks and pads, tried and tested with my own right foot. see how these get on. i make sure the hubs are clean before i do anything else, the disks have only been on a year, and have started to judder/warp about a month ago... You mean your not left foot breaking?!?! Quote Link to comment Share on other sites More sharing options...
Krzys Posted August 6, 2015 Share Posted August 6, 2015 You mean your not left foot breaking?!?! Might be using the ol' heel 'n' toe! Left foot braking is more for keeping boost on Quote Link to comment Share on other sites More sharing options...
philgor Posted August 12, 2015 Author Share Posted August 12, 2015 Got the front disks and pads on, the rears still need doing, but both carriers have a seized slider, so had to give up. Most of the juddering has gone, did notice a tight spot on the osr disk, so must be that, the rear hubs were quite rusty. And the front disks were warped and cracked. Had to hammer them off.. 1 Quote Link to comment Share on other sites More sharing options...
Krzys Posted August 12, 2015 Share Posted August 12, 2015 Hammers fix everything! Quote Link to comment Share on other sites More sharing options...
3gdean Posted March 27, 2016 Share Posted March 27, 2016 Thread revival... Ive done 15K on mtec discs dimpled/grooved. they are proper scraper now, had a regrind in between discs. no good with mintec pads, unbearble amounts of dust. 9k on these ds2500 didnt last 2 seconds with these discs, braking power was great. still not enough for semi-track. 6ishK on these, (was boost tho) Anyone know of a link for 4x114.3 282mm brembo blanks....really struggling. Cheers All Quote Link to comment Share on other sites More sharing options...
Dave Posted March 28, 2016 Share Posted March 28, 2016 Not sure if Brembo do them for the MB6 stud pattern/disc size mate. You had a look on their site? Quote Link to comment Share on other sites More sharing options...
dr_broon Posted March 29, 2016 Share Posted March 29, 2016 Sure that I've seen Brembo brakes for ours.. Not sure if it was just pads though. I've had ebc grooved disks before and liked them (more than the black Diamond ones I had before). Quote Link to comment Share on other sites More sharing options...
dr_broon Posted March 29, 2016 Share Posted March 29, 2016 Have had a look here http://www.apbrakediscs.co.uk/ These guys seem to specialise in Brembo, but don't list disks for the vti. Might be worth dropping them an email if you are really interested in brembo Quote Link to comment Share on other sites More sharing options...
3gdean Posted March 29, 2016 Share Posted March 29, 2016 have looked will have to drop an e-mail. teg forum swears by brembo blanks 99% sure a furum did a group buy for 4x114 fitment for the jdm 96 teg. any other blank discs recommended on here??? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.