Mini_matt Posted April 7, 2016 Author Share Posted April 7, 2016 I was going to replace with ceramic resistors but wasn't sure on what resistance I needed so took the easy option, I will check the resistance so I know for future reference if it does break again Quote Link to comment Share on other sites More sharing options...
Chandler Posted April 7, 2016 Share Posted April 7, 2016 to be honest for the price of them on ebay. its not worth the messing about putting resistors in. that old one does look well used Quote Link to comment Share on other sites More sharing options...
dr_broon Posted April 7, 2016 Share Posted April 7, 2016 Yeah, my days of mucking about trying to solder them are long gone. Cheap as chips now Quote Link to comment Share on other sites More sharing options...
Chandler Posted April 7, 2016 Share Posted April 7, 2016 ye i picked mine up for about £4 i think as they had an offer on ebay. still waiting to get it in the car haha Quote Link to comment Share on other sites More sharing options...
Mini_matt Posted April 7, 2016 Author Share Posted April 7, 2016 Bargain! I paid £5.89 delivered! Lol not worth getting the soldering iron out really lol Quote Link to comment Share on other sites More sharing options...
Chandler Posted April 7, 2016 Share Posted April 7, 2016 ye its a no brainer really Quote Link to comment Share on other sites More sharing options...
Mini_matt Posted April 8, 2016 Author Share Posted April 8, 2016 Update on the seat, I believe it's shrunken due to some water/sun damage, asked on FB group and have been offered a pair of front seats from a low mileage mb for £20 so getting them on Monday! So, who can tell me what silver my car is, Halfrauds have a few different silvers. Satin Silver Noble Silver Blade Silver Vogue Silver Quote Link to comment Share on other sites More sharing options...
Chandler Posted April 8, 2016 Share Posted April 8, 2016 as @UnicyclingTom said Quote Link to comment Share on other sites More sharing options...
Mini_matt Posted April 11, 2016 Author Share Posted April 11, 2016 Seats turned up this morning! Not quite as good as advertised (small hole in the fabric) but still a vast improvement over the shrunken leather one! Here ladies and gents is why you need to look after your leather! Quote Link to comment Share on other sites More sharing options...
Mini_matt Posted April 12, 2016 Author Share Posted April 12, 2016 Starting to think about exhausts again, having just replaced the whole lot with a standard system it's very quiet and boring! I think I'll just replace the backbox but ideally one that will bolt straight up (I can weld if I need to though but I would want to get a flange to do it properly) I don't want too much noise so 2-3" max on tail pipe size. what other Honda backbox would fit? To make finding something easier Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.