Jump to content

my civic vt-i project


civicturbo79

Recommended Posts

  • Replies 162
  • Created
  • Last Reply

Well today i had that much on with work and trying to get on the civic at the same time i forgot to take pictures today , but i did get the o/s inner arch etch primed , primed and the sealed and then i filled the front edge of the sill where i welded it etch primed ,primed and sealed and painted that part so i could refit the wing,door and front bumper so i could get some parts back on the car and off the floor plus check the door to sill gaps before i started filling the o/s incase some areas needed adjusting with a hammer :D

Ill get the pictures of todays work tomorrow when im down the unit , we have vxr online and some of the lads fom civic 5 down tomorrow so it will be a great day .

Rich.

Link to comment
Share on other sites

I started today by priming sealing and painting the inner archs on the inside of the car

vt009.jpg

vt010.jpg

vt008.jpg

vt011.jpg

After that i spend most of the day filling the wheel archs ready for paint .

vt012.jpg

vt014.jpg

Then i spray sealed the inner archs on the outside for the factory look and the inner seals and stone guarded them .

vt017.jpg

vt018.jpg

vt015.jpg

vt020.jpg

vt019.jpg

vt016.jpg

vt021.jpg

vt022.jpg

Rich.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...