Jump to content

[R.I.P.] mine little turbo boosted MB1


aswa

Recommended Posts

Hey guys,

Im from Hungary, and I living here to, so sorry if i does some mistakes when i write this, mine english is not perfect.

Im new here, so i was think i write some sort of mine MB1.

After 2,5years and a lot of work, i was broken mine car at 2011/11/11, it wasent so lucky day for me... :cry: It was an turbo D16 vitara build with 26psi of boost on E85 fuel. Now new project starts, i was bought an pirates black MB6 (its not in the best shape and a lot of stuff is missing/taken out. The engine if fully empty, theres no any cables, brake lines, abs, or any pipe, just only the steel under the hood. From the interior missing a lot of things to like dashboard, seats, air lines. The suspension is not full to, missing some stuff. Ahh and the tank is missing to..). I think it will be a lot of hard work to rebuild the whole car and get back in a good shape, with a new suspension, engine, interior and a new paint to. In mine MB1 i was build the whole engine, and the turbo stuff to. The whole car was builded by me. Now time to build an new car with an freshly new engine. I hope it will be on the roads in the early new year.

Now here some spec of mine MB1

Engine (D16Y2):

-Y.C.P Vitara 75.5mm pistons

-D16A6 NPR rings

-Custom lenght P2P0 forged I-beam rods

-ACL Race bearings

-New OEM Z6 ported oil pump

-ARP headstuds

-Cometic head gasket

-ACT extreme preassure plate clutch

-ACT 6puck clutch

Turbo:

-Chinase GT30 turbocharger

-OBX Racing Ramhorn manifold

-EMUSA 38mm Tial copie wastegate

-HKS SSQV3 bov

-31"x11"x3" EMUSA intercooler

-custom made by me, intercooler piping(2,25"/2,5").

Fuel:

-RC 1000cc low impedance injectors

-Walbro 255lph pump

-GM 3bar mapsensor

-PWN electric boost controller

-SX performance fuel pressure regulator

Cooling:

-Aluminium radiator

-Slim ventilation

-Oil radiator

Gauges:

-Prosport oil temp

-Prosport oil pressure

-Prosport turbo pressure

Exhaust:

-3" custome made by me, exhaust from stainless steel

-resonator pipe

-Skunk2 3" muffler

Brakes:

-EBC turbo grove disk (300mm front, 260mm rear)

-EBC Yellow stuff pads

Suspension:

-80mm lowering

-modified shocks

Some pics:

308604_141374879290299_100002533626073_212609_3372416_n.jpg

312032_141373572623763_3601228_n.jpg

And videos...

http://www.youtube.com/watch?v=wIgUJDuTH0

Rest In Place mine little MB1, its gona forever :( But new build will be start soon...

Link to comment
Share on other sites

  • Replies 32
  • Created
  • Last Reply

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...