fyfie5 Posted October 29, 2012 Author Share Posted October 29, 2012 You shouldn't need studs, unless you snap them of course. Just undo the o2 sensor, 17mm iirc. Use plenty of wd40 and all should be fine. thanks for replying nick, ill start soaking the 02 sensor in wd40 then by the time my gaskets come it should be ok think i might order some studs just for peace of mind just in case! Quote Link to comment Share on other sites More sharing options...
Raz s Posted October 29, 2012 Share Posted October 29, 2012 You shouldn't need studs, unless you snap them of course. Just undo the o2 sensor, 17mm iirc. Use plenty of wd40 and all should be fine. thanks for replying nick, ill start soaking the 02 sensor in wd40 then by the time my gaskets come it should be ok think i might order some studs just for peace of mind just in case!As said above iv'e not had a stud snap on me. the worst iv'e had happen is the whole stud coming out with the nut still on. But yeh ,soak them and the lambda sensor and pull on it quick/snap with the spanner once seated correctly. pulling slowley when not seated properly it will soon round. so id advise wire brushing too. Quote Link to comment Share on other sites More sharing options...
fyfie5 Posted October 29, 2012 Author Share Posted October 29, 2012 ok great thanks for the advice! Quote Link to comment Share on other sites More sharing options...
fyfie4 Posted October 29, 2012 Share Posted October 29, 2012 the fogs are not really salvagable to be honest with you fyfe, i would be looking into some nice newish shiny wans!!lol at you pretending you know stuff haha Quote Link to comment Share on other sites More sharing options...
fyfie4 Posted October 29, 2012 Share Posted October 29, 2012 the fogs are not really salvagable to be honest with you fyfe, i would be looking into some nice newish shiny wans!!lol at you pretending you know stuff haha Quote Link to comment Share on other sites More sharing options...
cardenty Posted November 1, 2012 Share Posted November 1, 2012 Nice!! Fare play tae yi!I could easy sell yi a complete mb6!! For an conversion! Quote Link to comment Share on other sites More sharing options...
cardenty Posted November 1, 2012 Share Posted November 1, 2012 You,ll have to roll through this way sometime! Mini ne meet Quote Link to comment Share on other sites More sharing options...
fyfie5 Posted November 1, 2012 Author Share Posted November 1, 2012 Nice!! Fare play tae yi!I could easy sell yi a complete mb6!! For an conversion!cheers! how i would like an mb6! and could be keen for a meet sometime even though im putting my winter wheels on soon. Quote Link to comment Share on other sites More sharing options...
fyfie5 Posted November 1, 2012 Author Share Posted November 1, 2012 got nearly all my gaskets etc for installing the manifold, there is only one thing that im worried about is the o2 sensor underneath the car. It is connected to the cat but the hole for it is on my new manifold not the de cat do you think it will stretch in to that hole? or what can i do to make it fit? Quote Link to comment Share on other sites More sharing options...
Vtec-Maniac- Posted November 1, 2012 Share Posted November 1, 2012 Big difference from beginning to now mate! looks amazing! and it is lowww Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.