KiNK43 Posted June 3, 2016 Author Share Posted June 3, 2016 Maybe.. Had it sorted last time I drove it by re setting up the tb. Not sure what's occurin now. Quote Link to comment Share on other sites More sharing options...
KiNK43 Posted June 4, 2016 Author Share Posted June 4, 2016 Me not know Quote Link to comment Share on other sites More sharing options...
KiNK43 Posted July 19, 2016 Author Share Posted July 19, 2016 Engine needed a better breather setup to deal with blow by when in boost. So had an-10 bosses welded to rocker cover In order to do this is to drill out all the rivets holding on the internal baffle. So drilled and tapped all the holes to accept m5 bolts. After cleaning it all refitted the baffle with sealant and thread locked the bolts in. Painted the cover gloss black. And fitted to the car with 10mm lines running into a ventilates catch can near the battery. Vent is 25mm diameter. Also painted boost pipe as silver was offensive Went to japshow car was on Dynodaze stand.. got a lot of attention actually. Always Lots of people nosing around it. Some nice comments etc. 2 Quote Link to comment Share on other sites More sharing options...
noodels Posted July 19, 2016 Share Posted July 19, 2016 Well done on the install,not seen this for a while 1 Quote Link to comment Share on other sites More sharing options...
KiNK43 Posted July 20, 2016 Author Share Posted July 20, 2016 Thanks mate @noodels Quote Link to comment Share on other sites More sharing options...
philgor Posted July 20, 2016 Share Posted July 20, 2016 Looking really good! Must be awesome to drive! Quote Link to comment Share on other sites More sharing options...
kern Posted July 20, 2016 Share Posted July 20, 2016 this thing must be rapid! bet it surprises alot people! Quote Link to comment Share on other sites More sharing options...
KiNK43 Posted July 20, 2016 Author Share Posted July 20, 2016 @kern yeah goes alright to be fair shows up a lot of big modern cars for sure. Power is backed off a bit 290bhp. Due to new actuator running 7 psi. Will bump it back up soon when bored with an electronic boost controller. Still have to drive it hard like a Honda should to keep it in the power band tho. Quote Link to comment Share on other sites More sharing options...
KiNK43 Posted August 4, 2016 Author Share Posted August 4, 2016 Pretty pumped now. Got all the gadgets going In. Electronic boost controller and 3 port solenoid has turned up. So will have a faster spool and more power again soon. Am waiting for my injectors to come back from ultrasonic cleaning tho. In a bid to stop hunting idle. The hunting has virtually disappeared with an overly rich idle. So suspected that one injector is leaning out and more fuel has brought it up to an acceptable level. 1 Quote Link to comment Share on other sites More sharing options...
philgor Posted August 4, 2016 Share Posted August 4, 2016 Thought it looked good in the photos, then saw it on Saturday, looked absolutely awesome, and went like stink! Bloody brilliant! 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.