Jump to content

Speed Equip Aerodeck Vti-s **Breaking complete car ** 02/18


10000rpm
 Share

Recommended Posts

Looking good, man, love your car. How do the Meisters compare to the BC's? I've been thinking about buying either one.

Thanks man,

The BC's were good, you have a lot of adjustment like the meisterR's but the BC's were always a little on the softer side.

For comparison I had my BC's set up at zero preload, damper setting 22 on the front and 5mm preload, damper setting 18. The car was very comfortable to drive and not harsh at all.

The Meisters are at the same setting as above but with zero preload at the rear too and the stiffness is a lot more. It feels more steady around fast turns alot less body roll which I feel is a must in the aerodeck due to its size.

The BC's are approx 2 years old and still look like new, mainly because I had coilover socks fitted and I would turn the rings every 6 months so nothing got seized.

Hope that's what you were after

Link to comment
Share on other sites

Ye there are Wilksey I looked into getting some then couldn't be bothered ha ha. I've had my meisters for 3 years now and only 1 of them had seized because I didn't grease em up enough. Apart from that they are outstanding!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...