mcjacko1987 Posted November 17, 2014 Author Share Posted November 17, 2014 Job today was dropping FroSTy onto her sweet little arse. 40mm h&r installed by myself. Ran across one problem where the drivers hub clamps onto shock the thread in the hub and the nut where rounded. Fixed that with a longer bolt and a locking nut. Took me about 5hours to complete with running to motorworld for a 15mm socket and going back again for the bolt. Happy with results. Sits just above tyres. Be better in a week when settled. Thanks to bdperformance for provideding springs.Now she just needs a bath after a well deserved kfc... Pics to follow... Quote Link to comment Share on other sites More sharing options...
mcjacko1987 Posted November 17, 2014 Author Share Posted November 17, 2014 Before bolts I gotWhere it was rounded. As well as the bolt My fixLooks on the pic like it's rubbing arb drop link but it ain't FrontSitting well already. Be spot on after a week of settling. Now for a bath..... For us both Quote Link to comment Share on other sites More sharing options...
mcjacko1987 Posted November 17, 2014 Author Share Posted November 17, 2014 Quote Link to comment Share on other sites More sharing options...
mcjacko1987 Posted November 17, 2014 Author Share Posted November 17, 2014 That's it for now Quote Link to comment Share on other sites More sharing options...
mcjacko1987 Posted November 17, 2014 Author Share Posted November 17, 2014 Some bits might not make sense but that's due to copying off a forum lol Quote Link to comment Share on other sites More sharing options...
Krzys Posted November 18, 2014 Share Posted November 18, 2014 You've done a fair bit to her so far! Looks good! Quote Link to comment Share on other sites More sharing options...
mcjacko1987 Posted November 18, 2014 Author Share Posted November 18, 2014 Spent a fair bit too :/ lol Quote Link to comment Share on other sites More sharing options...
mcjacko1987 Posted November 22, 2014 Author Share Posted November 22, 2014 Wash time Quote Link to comment Share on other sites More sharing options...
mcjacko1987 Posted November 29, 2014 Author Share Posted November 29, 2014 Quote Link to comment Share on other sites More sharing options...
noodels Posted November 30, 2014 Share Posted November 30, 2014 Think some correct spec bolts needed.Them ones are made of toffee and will stretch sooner rather than later .. also need tracking done now its lowered Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.