Mr Brown Posted October 23, 2013 Share Posted October 23, 2013 This switch here is not working in our MB6 it feels normal when you turn it but it is not changing anything and is staying on face vents Any suggestions guys as to what it prob is before i start taking things apart... Quote Link to comment Share on other sites More sharing options...
Roylewaa Posted October 23, 2013 Share Posted October 23, 2013 I'd try and have a look under the housing under the matrix at the back to make sure it's connected and moves etc first If you move the carpet and iirc a small panel you can see better Hope this helps:) Quote Link to comment Share on other sites More sharing options...
simpo Posted October 23, 2013 Share Posted October 23, 2013 Just strip it lol it's the only way! Quote Link to comment Share on other sites More sharing options...
Chandler Posted October 23, 2013 Share Posted October 23, 2013 the mechanism is to the left of your right foot XD i only found out when i was under my dash today. have a look to see if all the pins are lined up still Quote Link to comment Share on other sites More sharing options...
Mr Brown Posted October 23, 2013 Author Share Posted October 23, 2013 cheers chaps. The mrs has taken her to work tonight so will check tomorrow afternoon Quote Link to comment Share on other sites More sharing options...
Dave Posted October 24, 2013 Share Posted October 24, 2013 Sounds like it's disconnected at the heater mate, or, if you're unlucky, it may have come away at the switch end of the cable. If it has, then it's a centre console out job to repair it. Quote Link to comment Share on other sites More sharing options...
Mr Brown Posted October 24, 2013 Author Share Posted October 24, 2013 Fingers crossed, it has the normal feel through switch and even feels as if it is doing something, but nothing happens Quote Link to comment Share on other sites More sharing options...
KiNK43 Posted October 24, 2013 Share Posted October 24, 2013 Fingers crossed then. Drivers side should be able to see the green arms that cables connect to. Quote Link to comment Share on other sites More sharing options...
Mr Brown Posted October 25, 2013 Author Share Posted October 25, 2013 CHEERS GUYS !!! Thanks for the pointers have had a look unfortunately it all good under the floorwell so it behind the switch so centre column out.. Good news i manually adjusted it so now it is set on windscreen so it will clear it impossible to drive in the rain it is not fully set on screen so it also blows on feet as well and i can also feel a bit of air coming through face vents so all good to go for the winter.. Will be fixing her at a later date that way i may make some changes at the same time Quote Link to comment Share on other sites More sharing options...
Roylewaa Posted October 25, 2013 Share Posted October 25, 2013 Least you know what the problem is now:)I bet someone's had a go at doing bulbs in the past and disturbed it without realising At least the screws of doom might have been removed before Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.