simpo Posted April 19, 2014 Share Posted April 19, 2014 It bolts up near oil filter and comes down and bolts to the mani Quote Link to comment Share on other sites More sharing options...
phill1975 Posted April 19, 2014 Share Posted April 19, 2014 Oh yeah forgot about that bracket Quote Link to comment Share on other sites More sharing options...
Grant Posted April 19, 2014 Author Share Posted April 19, 2014 Yeah that brackets still on there chaps. Just taken her out, my re fit hasn't made a difference. Although she did really badly stutter and loose all power for a second. Not sure whether the lamba sensor may be a little old and worn. Has been in the garage for nearly two years without being turned over. I have a friend with a welder not too far from me, so think I'll try a refit of the decat and if that doesn't solve it I'll have to put the standard back on Quote Link to comment Share on other sites More sharing options...
Grant Posted April 19, 2014 Author Share Posted April 19, 2014 Ok chaps. Quick vid, the second blip gives a better idea of what in hearing. Opinions, views, thoughts welcome http://youtu.be/8ebUHpySmAU Quote Link to comment Share on other sites More sharing options...
simpo Posted April 19, 2014 Share Posted April 19, 2014 I bet it's that bracket hitting the mani. Can't watch vid at the mo Quote Link to comment Share on other sites More sharing options...
simpo Posted April 19, 2014 Share Posted April 19, 2014 Where it bolts to the block make sure it's all sitting flush to the block as I had a problem once where it caught little piece of metal on the block which made it not sit flush Quote Link to comment Share on other sites More sharing options...
Grant Posted April 19, 2014 Author Share Posted April 19, 2014 Will check Adam thanks. Didn't actually take the bracket off the block though. But worth a look. Cheers. Quote Link to comment Share on other sites More sharing options...
Grant Posted April 20, 2014 Author Share Posted April 20, 2014 Anyone else listen to the vid and think that's normal for a 4-1 with decat? Quote Link to comment Share on other sites More sharing options...
simpo Posted April 20, 2014 Share Posted April 20, 2014 I would say that was blowing 1 Quote Link to comment Share on other sites More sharing options...
Grant Posted April 20, 2014 Author Share Posted April 20, 2014 Tis what I'm hoping too. And that by re welding the decat it will resolve it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.