dinochips Posted May 2, 2014 Share Posted May 2, 2014 So as lots of you requested; I am going to start off making a small amount of projector headlights to see how they go.To start with I am making these in my own personal time and they are not cheap to make, so please be patient with me.The headlights are a pretty much a direct replacement and take aroud 30mins- 1 hours to fit depending on your skills , all they need is a loom, amber indicator bulbs and HID kit which can supply at a extra cost. The reason is I have had some Issues with finding a HID kit which works perfectly, so if you have problems with pulsing HID's your not alone. The HID's I can supply will be the same as mine (which still pulse just its very hard to see).The next thing; these lights have LED strips for side lights, NOT halo rings like my own personal set. I am only going to make them with strips as it takes to long physically to add halo rings and fiddly for the time I have available.The price:Option A: £200 for basic headlightsOption B: £250 for HID's, Loom, and indicatorsAdd £15 for UK postage if needed.If from outsidde UK please add EU after your name so I know if you need LHD or a RHD set.I know they are pricey but can assure you personally from my experience these are better than competitors. I have not yet run them through a MOT but fairly confident they would pass as they are fully adjustable, through the standard headlight controls. Also unlike some out there, mine have High and Low beam.I do currently have my old set ready for sale. These will be the only set I am selling with LED rings in. They are not up to the standards of my new creations and need to be wired in compared to the new plugged ones. But if you fancy them PM me with your offer (highest Offer wins).All I need you guys to do is to put your name down if you want a set, as make them I will let you all know; and hopefully one by one make my way through the list. For fairness; this will be names picked from a hat. Once you are chosen, notified - I will then run through with you to what you need to do get them running (its very very simple).Photos of the finished objects installed will be added soon - (after a special few have already had their sets made).So if you fancy a a set please enter your Name and Op: A or B Below.1.2.3.4.5.6.7.8.9.10.add more if needed 3 Quote Link to comment Share on other sites More sharing options...
Grant Posted May 2, 2014 Share Posted May 2, 2014 Too work mate. Loads of time and effort gone into these I'm sure. Quote Link to comment Share on other sites More sharing options...
MB3Matt Posted May 3, 2014 Share Posted May 3, 2014 As its nearly my birthday, I shall see how much £££ I get, as this saves me building my own set Quote Link to comment Share on other sites More sharing options...
Dougie Posted May 3, 2014 Share Posted May 3, 2014 awesome dude, ill be having a set in the future but not for a while as im flat broke at the moment, ill let you know when the time comes Quote Link to comment Share on other sites More sharing options...
ammarbm Posted May 3, 2014 Share Posted May 3, 2014 Ouch that price tag has shattered my dream of owning one of these sets .. Looks like it will be a while before I can get my hands on one of these. .glws though mate you do make a lot of effort to make these. Quote Link to comment Share on other sites More sharing options...
hubert Posted May 3, 2014 Share Posted May 3, 2014 So as lots of you requested; I am going to start off making a small amount of projector headlights to see how they go.To start with I am making these in my own personal time and they are not cheap to make, so please be patient with me.The headlights are a pretty much a direct replacement and take aroud 30mins- 1 hours to fit depending on your skills , all they need is a loom, amber indicator bulbs and HID kit which can supply at a extra cost. The reason is I have had some Issues with finding a HID kit which works perfectly, so if you have problems with pulsing HID's your not alone. The HID's I can supply will be the same as mine (which still pulse just its very hard to see).The next thing; these lights have LED strips for side lights, NOT halo rings like my own personal set. I am only going to make them with strips as it takes to long physically to add halo rings and fiddly for the time I have available.The price:Option A: £200 for basic headlightsOption B: £250 for HID's, Loom, and indicatorsAdd £15 for UK postage if needed.If from outsidde UK please add EU after your name so I know if you need LHD or a RHD set.I know they are pricey but can assure you personally from my experience these are better than competitors. I have not yet run them through a MOT but fairly confident they would pass as they are fully adjustable, through the standard headlight controls. Also unlike some out there, mine have High and Low beam.I do currently have my old set ready for sale. These will be the only set I am selling with LED rings in. They are not up to the standards of my new creations and need to be wired in compared to the new plugged ones. But if you fancy them PM me with your offer (highest Offer wins).All I need you guys to do is to put your name down if you want a set, as make them I will let you all know; and hopefully one by one make my way through the list. For fairness; this will be names picked from a hat. Once you are chosen, notified - I will then run through with you to what you need to do get them running (its very very simple).Photos of the finished objects installed will be added soon - (after a special few have already had their sets made).So if you fancy a a set please enter your Name and Op: A or B Below.1.Hubert2.3.4.5.6.7.8.9.10.add more if needed Quote Link to comment Share on other sites More sharing options...
Krzys Posted May 3, 2014 Share Posted May 3, 2014 Guys, we will be fitting my set on japfest morning, so come and have a look at the quality of these awesome custom made aftermarket parts!(I think krzys will also be having his done too)I'll be collecting mine at Japfest but won't be fitting them until the end of the month, though I could possibly jiggle some money and order a HID kit now and hope it comes before Friday!? 1 Quote Link to comment Share on other sites More sharing options...
shaikh Posted May 3, 2014 Share Posted May 3, 2014 Aaah man i so badly want them bt that price tag.... :( guess ill be stayin without them for a while now...But i have question i already got the hids ao ill just need some onw who knows how to fit and they would be ok qith the current hid kit? Quote Link to comment Share on other sites More sharing options...
zoomvti Posted May 3, 2014 Share Posted May 3, 2014 1. Hurbert (a or b mate?)2. Zoomvti.....not sure which option as I don't know what "loom" you're referring to and I think my current HIDs should work on them.3.4.5.6.7.8.9.10. Quote Link to comment Share on other sites More sharing options...
NIKH25 Posted May 3, 2014 Share Posted May 3, 2014 Great work James, I guess I'd better start saving. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.