Leaderboard

I was on holiday for a week but managed to bring some parts back with me Thank you, seems like a never ending task at the moment as I keep finding little jobs to do! Short update since getting back; I've fitted some roll cage protection so I don't damage the paint lifting stuff in and out and later on don't damage myself it I hit the cage! Drivers door pull is also now on, and put cage protector up above my head. Hope I can't get anywhere near the top one! Need to make the rear door cards, so made up the template Need to photo the finished card but only the rear left one to do. I have found the door lock mechanism so will fit that the same as the front door. Oil System - I have the Accusump system to install but first I needed more parts so had to get a load of fitting so got some for all the other hoses at the same time. New Accusump hoses and fittings, including a one way valve to makesure the oil goes the right way back to the engine! T-piece fitting on the bulkhead runs into the car and back to the accusump reservoir. Now need the engine back in to trim the hoses connecting to the engine. Also started to make up the oil breather hose from the back of the engine. Accusump with remote opening valve and new fittings ready to install Needed to fit a cahmber for the MAP sensor so made a bracket and installed under the intake manifold. Just have to run the 4 small hoses to connect it to the intake runners Last of the bolts turned up for the engine so all the hardware has now been refreshed! Last job yesterday was installing the windscreen and side windows by bonding them in. Found a windscreen guy locally who did the job for me, although my hands are still covered in the sealant! All the bonded panels are installed like the rear quarters, rear screen and front screen. Now have to run the cables for the heating elements back so I can connect them up in the cabin

Hi everyone been a while since I've uploaded anything on this. Be on and off the last 6 months just had so much else going on. I have now a reason to put everything else aside to build this car as a close friend who was very interested in the car and who was one of the few people that supported me with it tragically passed away a few weeks back and now I'm going to build the car in his memory. There is a lot come with this project and will need a hand with a few things and it most definitely will be one of a kind and I look forward with sharing it with you all so watch this space!

Thanks guys means a lot going to his funeral tomorrow and then after that straight on the car I've got a total of 2 weeks off in May to boost the car along a bit

Do you find your head hurts when you do? Because mine does when I drive an auto

May go give you an online stalk! Cover looks sweet!!

Im happy with mine, gives me time to think!

True manual mode - Does it magically grow a clutch pedal and gear stick?

That rocker cover looks spot on Dan!