Leaderboard

Thats really quick progres your making mate. Nice to see the end sill plate/aarch panels are available. Think i'd be bricking it to cut out the rusty metal but best thing to do, will leave you with a totally rut free shell. Your grandparents would be well proud of the work your doing to save their car. Hats off to you mate, deffo following this build!

So Today i have sorted out the boot floor finally, as it was starting to get on my nerves a bit. but its all welded, seam sealed and painted. alongside the refitting of the tow eye reinforcer. i also jacked it up to see if it would break, it didnt! which is great. Later on i started to work on the passenger side sill, i have cut away an area to gain access to the lower section, this will then be cut further out when i fit the new upper piece in. I will be fabricating new reinforcer panels, perhaps a new jacking point panel and the panel that joins the sill to the arch. Ive cut the area out of the arch out as i have a New old Stock panel to go in place, i also have a fabricated lower sill that i made earlier on in the year which will be getting cut to size to be butt welded in. I have also done some very quick fitments just to get an idea of the final work, although there is still some more cutting and grinding to do before everything fits in perfect. hopefully that will be all done tomorrow.

Thank you! I was pretty pleased with the job to be fair, quite surprised, seam sealer does help too if the welds aint the best ;)

Yeah mate did this one myself used teckwrap wrap this time it's good stuff