noodels Posted May 12, 2015 Share Posted May 12, 2015 Perhaps you need to check tracking and rear toe,critical on these for rear end bump steersome links here on how to also many other areas of set ups,done my valve lash other day sounded like a tractor.TCT recon also done when first got car as TCT<timing chain tentioner> rattles on many s2000s,Done rear polly bushes and new bolts 18months ago too,pig of a job and had to use reciprocating saw to cut them off...arch looks solid mate unlike many, good to work with solid material. https://robrobinette.com/S2000Alignment.htm&1 or 2 Silver stones to look at here http://www.s2ki.com/s2000/topic/83595-superior-silverstone-pics-post-since-we-all-know-there-are-so-many-more-of-us/ 1 Quote Link to comment Share on other sites More sharing options...
Chandler Posted May 13, 2015 Share Posted May 13, 2015 ha ha are you doing small updates at a time then!! not big updates you fecker!! Quote Link to comment Share on other sites More sharing options...
Krzys Posted May 13, 2015 Share Posted May 13, 2015 That's what she said. Quote Link to comment Share on other sites More sharing options...
Chandler Posted May 13, 2015 Share Posted May 13, 2015 Nah she probably just said little and not often Krys Quote Link to comment Share on other sites More sharing options...
Grant Posted May 13, 2015 Share Posted May 13, 2015 Just the tip !! What happened? Did the prev owner scrape it down a fricking wall ??!?! Quote Link to comment Share on other sites More sharing options...
Krzys Posted May 13, 2015 Share Posted May 13, 2015 Just the tip !! What happened? Did the prev owner scrape it down a fricking wall ??!?!I'm willing to bet it all began with the phrase, "Watch this...." Quote Link to comment Share on other sites More sharing options...
Grant Posted May 13, 2015 Share Posted May 13, 2015 I'm willing to bet it all began with the phrase, "Watch this...." More than likely ! Quote Link to comment Share on other sites More sharing options...
dinochips Posted May 13, 2015 Author Share Posted May 13, 2015 Will chuck a load more up tomorrow just chucking it up bit by bit till its up to date, car is runnging perfectly now and all good so it does have a good ending. well like most project it never ends) Perhaps you need to check tracking and rear toe,critical on these for rear end bump steersome links here on how to also many other areas of set ups,done my valve lash other day sounded like a tractor.TCT recon also done when first got car as TCT<timing chain tentioner> rattles on many s2000s,Done rear polly bushes and new bolts 18months ago too,pig of a job and had to use reciprocating saw to cut them off...arch looks solid mate unlike many, good to work with solid material. https://robrobinette.com/S2000Alignment.htm&1 or 2 Silver stones to look at here http://www.s2ki.com/s2000/topic/83595-superior-silverstone-pics-post-since-we-all-know-there-are-so-many-more-of-us/ your going to love what they way I get my bolt out of the rear arms when i get to it got poly bushes going on mine in the summer should be easy job now I sorted out the seized bolts. Quote Link to comment Share on other sites More sharing options...
noodels Posted May 13, 2015 Share Posted May 13, 2015 Sounds interesting,tried a grinder and its was a no can do..shops want sh1t lot of £ to do bushes on the "S"..have read.Got Eibach springs to put on one day had them 6 months now,F25/R30mm any day soon just got to borrow some spring clamps from bro.and its warmer these days to work outside <my excuse anyway> 1 Quote Link to comment Share on other sites More sharing options...
dr_broon Posted May 14, 2015 Share Posted May 14, 2015 Keep thinking about one of these after hearing one giving it beans the other day... Sounded lush Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.