jmlsmithy Posted May 21, 2015 Author Share Posted May 21, 2015 Great work mate! thank you mate it's getting there slowly For info, the stock suspension sits 10mm lower at the front, if you keep to that it'll turn in really nicely! yeah i've got it set up bang on now, the photo's above were taken about a month ago. thanks for the info. looking forward to seeing those new rims on mate! Gonna look sweet i reckon!i will post a picture up tomorrow evening mate, if you went to japfest you would of probably seen the car on the wheels 1 Quote Link to comment Share on other sites More sharing options...
jmlsmithy Posted May 21, 2015 Author Share Posted May 21, 2015 So, today on the way to work. i was halfway through overtaking when my car just cut out? rev counter, CD player, temp gauge everything. had to turn to car off and then start it again, luckily it does start back up. it's done this twice now and both times I've been overtaking around 8.2k revs. anyone had this issue before? I've asked a few people and seem to be pointing it at the ignition switch wiring issue? been about a month apart since the last time. can't be dizzy or anything like that as it wouldn't cause everything to cut out. i am a mechanic, checked all the earths etc. any info on this will be much appreciated as i'm planning on making this into a track car and don't want this to happen whilst out on the track. Quote Link to comment Share on other sites More sharing options...
jmlsmithy Posted May 21, 2015 Author Share Posted May 21, 2015 That isn't good!certainly not doesn't fill you with confidence when you want to overtake or enjoy a nice road Quote Link to comment Share on other sites More sharing options...
Krzys Posted May 22, 2015 Share Posted May 22, 2015 Could be worth checking the connection on the ignition barrel as they have been known to cause problems as these get on. Quote Link to comment Share on other sites More sharing options...
Grant Posted May 22, 2015 Share Posted May 22, 2015 Could be a connection issue .. When at that higher revs it shakes something free? Quote Link to comment Share on other sites More sharing options...
simpo Posted May 22, 2015 Share Posted May 22, 2015 Pretty much brand new dizzy so wouldn't point in that direction! Quote Link to comment Share on other sites More sharing options...
jmlsmithy Posted May 22, 2015 Author Share Posted May 22, 2015 Could be a connection issue .. When at that higher revs it shakes something free? Could be worth checking the connection on the ignition barrel as they have been known to cause problems as these get on. Pretty much brand new dizzy so wouldn't point in that direction! I'll take a look at the wiring going into the ignition barrel tomorrow i think. oh really that's good to know must be ignition related i think for everything to cut out. Quote Link to comment Share on other sites More sharing options...
jmlsmithy Posted May 22, 2015 Author Share Posted May 22, 2015 As promised photo's of the new wheels on! Quote Link to comment Share on other sites More sharing options...
snakey135 Posted May 22, 2015 Share Posted May 22, 2015 They suit really nice mate! Great height too Quote Link to comment Share on other sites More sharing options...
dr_broon Posted May 22, 2015 Share Posted May 22, 2015 I'm not normally a fan of these sort of wheels, but they suit the car i reckon.Have you noticed much difference with the handling coz of the weight? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.