Chandler Posted January 31, 2016 Share Posted January 31, 2016 have a look on Japservice parts mate, they have some good stuff on there at a good price! Quote Link to comment Share on other sites More sharing options...
ickis86 Posted January 31, 2016 Share Posted January 31, 2016 STAY AWAY FROM XS POWER!!! Cheap knock off s**t.. Genuine honda or high end brand (Skunk2, Supertech etc) Defo new head studs. Defo DO NOT polish the ports. Its been proven on numerous occasions that a polished chamber actually REDUCES power as the air needs turbulence before entering the compression chamber.True that the INLET ports need turbulence and polishing would reduce this, however the exhaust ports are fair game, polishing exhaust ports helps the exhaust gas flow more freely and helps get it out and away from the engine. 1 Quote Link to comment Share on other sites More sharing options...
ickis86 Posted January 31, 2016 Share Posted January 31, 2016 Not a B series head but alot of the same science applies, some very good info here. Quote Link to comment Share on other sites More sharing options...
Chandler Posted January 31, 2016 Share Posted January 31, 2016 ye i plan to polish the exhaust ports once i can get all that carbon s**te out of them haha Quote Link to comment Share on other sites More sharing options...
ickis86 Posted January 31, 2016 Share Posted January 31, 2016 oven cleaner Quote Link to comment Share on other sites More sharing options...
Chandler Posted January 31, 2016 Share Posted January 31, 2016 good plan! i was just going to get a wire brush down there at work, hopefully tonight Quote Link to comment Share on other sites More sharing options...
ickis86 Posted January 31, 2016 Share Posted January 31, 2016 there's another chemical called H²o or something, you can get it from your local tap, helps break down carbon. 1 Quote Link to comment Share on other sites More sharing options...
Chandler Posted January 31, 2016 Share Posted January 31, 2016 haha i'll have a blast at somepoint Quote Link to comment Share on other sites More sharing options...
Jayhoath83 Posted January 31, 2016 Share Posted January 31, 2016 Ye defo portmatch the inlet not polish it n polish n match the exhaust side much beter for performance gains Quote Link to comment Share on other sites More sharing options...
Krzys Posted February 1, 2016 Share Posted February 1, 2016 Reverse osmosis water ( pure h2o) is better than tap water at dissolving everythingI bet you know just where to get such a commodity too. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.