Jump to content

ickis86

Member
 View Profile  See their activity

  • Posts

    81

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by ickis86

  1. ickis86
    Clutch seen better days, pretty glazed, few grooves in the pressure plate. Flywheel in good shape though. Unsure weather to get a lighter one yet.
  2. ickis86
    I left mine on and just tore them off, they came off fairly easy, just dont force anything if it starts to look like its tough and bending something. You might have take some pliars or something to get the frayed bits out from the edges. I used my girlfriends nail polish remover, wd40, some actual glue remover solution, alot of elbow grease and scotch brite. It really is a pig to get off! This might help
  3. ickis86
    Added one of the most important upgrades for these cars...
  4. ickis86
    I tore mine off, its black plastic and actually looks good, after alot of scrubbing to remove the old glue
  5. ickis86
    http://www.ebay.co.uk/itm/122523555225
  6. ickis86
    See how f**ked this clutch is after a couple more beers
  7. ickis86
    Submit my mb6 again
  8. ickis86
    Sh!te weather at the moment so pulled the engine out cause its getting in the way. Now its even more in the way, need a bloody good tidy up and fetch the engine stand out of storage
  9. ickis86
    Tucked wiring harness on passenger side, waiting for a few bits to finish it.
  10. ickis86
    Had a couple of hours go at the nsf arch, try throw a bit of protection on it and make it look tidy. One side done.
  11. ickis86
  12. ickis86
    Trying to get the suspension sorted so i can sit it on wheels and roll it outside. All bushes changed up front.
  13. ickis86
    Engines going to get complete rebuild with new mains, arp rod bolts, jap type r pistons, new oem oil and waterpump and belt. Type r head and valves/springs with b18c4 cams, oem head gasket. Should be about 11.25:1 cr. Not a complete wrap up there who knows i change my mind alot. Still havnt got any bits for the gearbox which will need rebuilding/i want to rebuild.
  14. ickis86
    Can i submit my mb6
  15. ickis86
    Got hold of some honda legend twin pot calipers
  16. ickis86
  17. ickis86
  18. ickis86
    Im alive. Keeping busy. Getting into the guts of her now. Was able to slip the cambelt off with my fingers, without detentioning it :/ Bores look ok, engine stand on order. Could do with tidying my garage a bit as its chaos in there right now, im not the most organised worker. Sorry for lack of updates but im slowly chipping away at it
  19. ickis86
    found your old thread
  20. ickis86
    no
  21. ickis86
    lma's?
  22. ickis86
    i'd go for Hel too, they're british and come in any colour. nothing wrong with goodrich, just rather support a british company and get them in the colour of my choice.
  23. ickis86
    has age and fuel made them swell up? if they're close enough i wouldnt worry too much, as long as its torqued down properly and you check for leaks it should be fine, its only fuel rail pressure not like a diesel or direct injection system.
  24. ickis86
    Scored a full vti-s body kit off a gentleman in Leicester for the grand sum of 100 quid. Even has complete front and rear bumpers, foglights and even washer jets! Needless to say I'm quite chuffed.
  25. ickis86

    Boost

    ickis86 replied to dogg1210's topic in Engine & Chassis

    i think you need different o rings
×
×
  • Create New...