KiNK43 Posted January 10, 2016 Author Share Posted January 10, 2016 Still waiting for a car to put things in. But Lots of bit turning up slowly.Got prosport gauges for boost,oil temp and oil pressure. So got the old soldering iron out and did the wiring. Used an iso extension so the power and lights are plug and play in any car. And I've used male and female molex power connectors for the sensors. So can be unplugged. They change colour to orange when headlights are on. And will be mounted in the space where the stereo was. 1 Quote Link to comment Share on other sites More sharing options...
Jayhoath83 Posted January 10, 2016 Share Posted January 10, 2016 They look good dude Quote Link to comment Share on other sites More sharing options...
Chandler Posted January 10, 2016 Share Posted January 10, 2016 them gauges look lush man!! guna have to be looking for some of em!! Quote Link to comment Share on other sites More sharing options...
KiNK43 Posted January 10, 2016 Author Share Posted January 10, 2016 There from r spec. Decent price. And all stepper motor digital gauges. So do the old sweep at startup.To be honest not the ones I wanted. But stuck to me morals and di dnt spend the extra just on bling. I'm a more go than show kinda guy Quote Link to comment Share on other sites More sharing options...
Chandler Posted January 10, 2016 Share Posted January 10, 2016 they look really nice though @KiNK43 good idea mounting them with an ISO adapter! did you get the sensors with the gauges? so there basically a plug and play? Quote Link to comment Share on other sites More sharing options...
KiNK43 Posted January 10, 2016 Author Share Posted January 10, 2016 Yeah sensors included @chandler. Boost gauge is also digital so has a sensor.If you spend a little more the next model up has daisy chained looms included. So much less faffing about with solder etc. But yeah quite happy with them. Quote Link to comment Share on other sites More sharing options...
KiNK43 Posted January 10, 2016 Author Share Posted January 10, 2016 Will mount boost sensor and possibly the oil pressure sensor on the bulkhead and run cables to there in some sort of conduit. I'm using a Sandwhich plate I baught for the oil sensors but pressure sensor is so big I think it will interfere with block or something else. So looking to connect it with a braided hose. Quote Link to comment Share on other sites More sharing options...
Chandler Posted January 10, 2016 Share Posted January 10, 2016 ye only thing that looks a pain is the oil pressure sensor :/ im not fussed about wiring mate Quote Link to comment Share on other sites More sharing options...
KiNK43 Posted January 10, 2016 Author Share Posted January 10, 2016 Not suprised after all that wire tucking and stuff you did jeez that looked knarly. @Chandler Quote Link to comment Share on other sites More sharing options...
Chandler Posted January 10, 2016 Share Posted January 10, 2016 which is the next model up mate? there are bloody loads on there! @KiNK43 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.