NIKH25 Posted March 1, 2014 Share Posted March 1, 2014 Looks like you've done a great job, PW raisers do look Quote Link to comment Share on other sites More sharing options...
JayLock Posted March 1, 2014 Share Posted March 1, 2014 Quick up date window tint arrived only got one back window done so far and my bonnet raiser's are fitted here's a couple of pics This is my first time tinting windowsnice job on the window tinting, did you take it out or apply it straight on? Also like the bonnet raise, is that hard to do? Looks proper boss! Quote Link to comment Share on other sites More sharing options...
M40DOX Posted March 1, 2014 Author Share Posted March 1, 2014 nice job on the window tinting, did you take it out or apply it straight on? Also like the bonnet raise, is that hard to do? Looks proper boss!I got some pre cut window tint and did them still on the car I just opened window a bit got the top in place then carefully closed it. I did the bonnet raises one side at a time the kit came with every thing I needed. The hardest part is trying to line it up after. Quote Link to comment Share on other sites More sharing options...
vtec2011 Posted March 1, 2014 Share Posted March 1, 2014 First attempt on tinting the windows? Top job you done there! The bonnet raiser looks cool too Quote Link to comment Share on other sites More sharing options...
powerofdreams Posted March 1, 2014 Share Posted March 1, 2014 Where u get the pre cuts and u got a link. Quote Link to comment Share on other sites More sharing options...
KiNK43 Posted March 2, 2014 Share Posted March 2, 2014 Good job on the tints. I'd love to do mine but probably mess it up Quote Link to comment Share on other sites More sharing options...
ammarbm Posted March 2, 2014 Share Posted March 2, 2014 Same question as Stephen. .where did you get them from mate and how did it go. .did you manage to remove all the bubbles. .I have been doing mine. . The quarter panels were perfect but rear windows I find hard. . Impossible to remove all bubbles if you are cutting the sheet yourself. . Don't know how good the pre cut stuff is? Quote Link to comment Share on other sites More sharing options...
M40DOX Posted March 2, 2014 Author Share Posted March 2, 2014 Where u get the pre cuts and u got a link.http://bit.ly/1hB6eyTThey do all different shades + tell them not to cut out for the high level break light Quote Link to comment Share on other sites More sharing options...
M40DOX Posted March 2, 2014 Author Share Posted March 2, 2014 Same question as Stephen. .where did you get them from mate and how did it go. .did you manage to remove all the bubbles. .I have been doing mine. . The quarter panels were perfect but rear windows I find hard. . Impossible to remove all bubbles if you are cutting the sheet yourself. . Don't know how good the pre cut stuff is?Got the odd bubble the hardest part is making shore you get the top wright cos it wrinkles up when you close your window. Quote Link to comment Share on other sites More sharing options...
powerofdreams Posted March 2, 2014 Share Posted March 2, 2014 http://bit.ly/1hB6eyTThey do all different shades + tell them not to cut out for the high level break lightLol wicked those are the same as I got previously but I fiucked up doing it. Will b reordering when money situation improves Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.