vtec2011 Posted July 26, 2014 Share Posted July 26, 2014 Looking goooood! Quote Link to comment Share on other sites More sharing options...
VTISmichael Posted July 28, 2014 Share Posted July 28, 2014 niiiiccccceee guess you will just have to polish them up everyday Quote Link to comment Share on other sites More sharing options...
93 Accord Posted May 18, 2015 Author Share Posted May 18, 2015 So some updates been a while! Bought a ATR Gearbox So the H22a came with a open diffed M2A4 Gearbox. It was shorter ratio'd than the Accords but due to the extra rpm the H spun, each gear went longer resulting in shift speed points been the same as the Accord. With the U2q7 gearbox things get more dramatic with the close gearing. And Helical LSD!! The old M2A4 is out. Changing the stud positions on the new U2Q7 box. Used a M10x1.25 tap and a 9mm drill.(Dont own imperial drills or 8.9mm drill) U2Q7 OBD2 to M2A4 OBD1 VSS sensor conversion. So the differences are the U2Q7 box has no powersteering lines going to it and a different bottom cog. But does have the same electrical plug setup. So process is dismantle sensors, heat cog, remove cog from shaft, then heat other cog, and remove of shaft. Then swap over. M2A4 OBD1 powersteering VSS sensor mounted to a U2Q7 Now ready for bolting the box in! 1 Quote Link to comment Share on other sites More sharing options...
Krzys Posted May 19, 2015 Share Posted May 19, 2015 It's great you're able to swap the bits over like that! Quote Link to comment Share on other sites More sharing options...
dr_broon Posted May 19, 2015 Share Posted May 19, 2015 Class. Good work Quote Link to comment Share on other sites More sharing options...
Grant Posted May 19, 2015 Share Posted May 19, 2015 Great work mate! Quote Link to comment Share on other sites More sharing options...
93 Accord Posted May 19, 2015 Author Share Posted May 19, 2015 Yes Hondas are good for that. This 4th gen Accord is part CB Accord part BB Prelude part CH Accord part Acura CL lol. Quote Link to comment Share on other sites More sharing options...
Krzys Posted May 19, 2015 Share Posted May 19, 2015 A bit of everything haha! Quote Link to comment Share on other sites More sharing options...
KiNK43 Posted May 20, 2015 Share Posted May 20, 2015 Haha fair play awesome stuff. Honda always surprise me with some ingenius solutions to things. Quote Link to comment Share on other sites More sharing options...
93 Accord Posted May 28, 2015 Author Share Posted May 28, 2015 So it in! H22A U2Q7 CB3! So I had it up on axle stands and fired it up, went the gears and bled the ps system, (vss sensor) and it went well, no grinds or clunks. (other than the surface rust on the discs scratching away lol) I have since test drove it, and its mega! A big difference trust me over the prelude box. 1 -3 are just manic, 4 is about the same 5 is short! The LSD is an animal, you can really feel the outside wheel pull you round. Really has completed the the front end for handling now! I have a audio file to upload, once I figure out how to separate it from a Go Pro 2 video (I mounted a microphone to the air filter and did a 0-100) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.