Paul_Batman Posted September 9, 2014 Author Share Posted September 9, 2014 what you mean grant? i was just saying the money i could get back to put towards the build =] full engine and box's tend to go for £550+ s9b's tend to sell for £150+ so i would stick my engine and ancillaries and wiring up for £350 - £400 depending on the market at the time 1 Quote Link to comment Share on other sites More sharing options...
Grant Posted September 9, 2014 Share Posted September 9, 2014 Mate sorry .. I skimmed read and thought you meant power ! 1 Quote Link to comment Share on other sites More sharing options...
Paul_Batman Posted September 9, 2014 Author Share Posted September 9, 2014 haha yeah i got that when i read it back as i didnt have £ signs New pictures. 2 Quote Link to comment Share on other sites More sharing options...
Krzys Posted September 9, 2014 Share Posted September 9, 2014 Mate sorry .. I skimmed read and thought you meant power !Reading fail 1 Quote Link to comment Share on other sites More sharing options...
Grant Posted September 9, 2014 Share Posted September 9, 2014 Reading fail Alos partial typo fail Great pics mate .. That system look epic !! 2 Quote Link to comment Share on other sites More sharing options...
Paul_Batman Posted September 9, 2014 Author Share Posted September 9, 2014 it's halved the noise of my old system and has a much more lower tone, sounds decent but i still need to get it extended by about 2" after the cat before the b pipe but the only extension that will fit that i can find is an american part =/ expensive for what it is, probably cheaper just to get a small pipe welded in but its on anyway! oh and it falls about 2" short of the back bumper so will fix this aswell =/ had loads of trouble with fitting due to having a Integra manifold on (previous cat could spin round to accommodate the flange holes) so ended up getting a stainless manifold to suit lol oh and bought my mates decat aswell! Quote Link to comment Share on other sites More sharing options...
Grant Posted September 9, 2014 Share Posted September 9, 2014 Its all happening mate ! Exhaust are never easy They always seem to have need of some modifying ! Have you not got access to a welder to put the extra couple of inches on? Quote Link to comment Share on other sites More sharing options...
Krzys Posted September 9, 2014 Share Posted September 9, 2014 Would a flexi joint fill the gap? 2 Quote Link to comment Share on other sites More sharing options...
Jayhoath83 Posted September 15, 2014 Share Posted September 15, 2014 Is that the same exhaust as the toyosports one on ebay as i wanna know if they are any good as they do look good Quote Link to comment Share on other sites More sharing options...
beastgtir Posted September 16, 2014 Share Posted September 16, 2014 They have decent reviews the toyosports as a few people run them but most say they need a little fettling when fitting. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.