Leaderboard

Went to ace cafe Halloween meet on the 27th of October and the organiser managed to get fast car to do a bit of a write up with pictures. Just had a quick flick through the pictures and mine is in the pictures page 6 I think hope you enjoy the rest of the cars. The Lexus VIP was stunning to say the least!! http://www.fastcar.co.uk/2013/11/07/slammed-uk-meet/

Ooo nice! That brace would blend-in nicely in my Civic's bay..

I do like those wheels, needs more lows now though.

http://www.ebay.co.uk/itm/HONDA-CIVIC-MK6-PLASMA-GLOW-WHITE-DIAL-KIT-RV-107-/250728809025?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3a609a0241#ht_1163wt_994 Reading the describtion you can request the other version for the MB6/MC2 if required!

Something that dyno daze rich advised me to do many moons ago. Is to disconnect the rad hose and poor some boiling water down there and hold it for a min. Then reconnect hose quick and fill the system with coolant. The thermostat will open enough to get coolant passed the stat so you don't get an airlock on the other side of the stat. It worked for me after about two hours fighting a loosing battle not shifting the air. I also like to go round all the hoses squeezing and watching the air bubble come up out the rad neck.

Or you can DaveMB2 where he got his from if you're struggling!

They look great well done!! Good easy write up too! Is there a place to get these for my mc2 in mph does anyone know??

Would have thought if there was a waterpump issue you'd be running too hot? Anyway as above, I'm inclined to believe the stat to be at fault, plus a potential faulty replacement! There was a really good "How to" written about parking the car facing uphil to aid with bleeding the coolant system! Though when I had a failed thermostat on my EK I just started it with the rad and expansion bottle caps off and kept topping them up until no more bubbles came out and the fan was kicking in regularly! Took a while but best to spend more time and do it properly! Edit: http://civic5.com/forum/index.php?/topic/6013-how-to-fill-and-bleed-a-rad-the-awesome-way/

Hi Rassiel, There shouldn't be any issues mate as the immobilizer is worked from the ignition key, it has a transponder in it. I got an aftermarket alarm system fitted to both my MB6 and Dawns MC1 Deck. As long as it's a proper fitter that's doing it, all should be straight forward mate

Your honour is honoured! Now in the How To section, and edited your original post to include the link But for those wanting the linky without scrolling back up this page, clicky here!