DAVEMB2

It's not a fast build as I have told the story it been off the road from 2005 and then got ripped apart and some I was left with just a oil coverd shell by the last garge that was building my project they all did a runner and left me 1000s out of pocket as well as no car . That's why it was going to be crushed but I could not do it to her so I said she had to be reborn bigger and better the best MB2 so she is now at a 80% finished state I am giving you the whole build over the last 5 days tomorrow the big day

Yer should do rob

I no rob but you will like it

18 hours or so left guys and spec will be here so make sure you check in

Yer pic of my evo 4 ,have a look in the projects you will find lots of stuff in there This is an early pic have Momo dc2 wheel and loads more

You can fit almost any seats , on c5 we have had members fit s2000 ,ep3 ,dc2 ,atr,to name some I have evo 4 ,5 seats in my mb3 they are not mega hard to do and if you can weld then that's even better

Yer they are skunk2 LCAs

Look a bit like team dynamics monza

I would have a trip to some where you can get a custom one made I have a mongoose with a 3 1/2" tail pipe on my mb3 . You may still be able to get a mongoose not sure coz they are or have stopped doing them for the M Custom powerflow would be good tooo coilovers avo , kw , but to name a few I wold say drop 40 mm front and rear prob about right not to low but looks nice

OK GUYS here we are again day five I think from the start of the build . Well as I have said before she is not 100% finished but she does now move under her own power Now tomorrow is the big day when you get to see her in all her glory yes there is still work to do to her on the outside ie body ,and a fair bit inside but they are not big probs and will be done to finish her off in style This car TRINITY D as been to hell and back but boy guys she back so here are just a few pics just to get you all ready for tomorrow she is coming ( need a big rolling bass line and big kick breakbeat video to bring her in ) Here are another shot of my two TRIN's ONLY 24 HOURS TO GO GUYS Hope you liking little TRINITY D MB2 Full spec tomorrow of her

Looking good rod but she's not yours Yer some nice breathing mods should do nice

Tom they are not realy pink they are light purple the camera just makes them look more pink They are brakelines the whole brake system is done with braided purple lines front and rear and the clutch line is purple to

X2

X2

OK GUYS so where am I upto o yes so with this epic build going on and sorting the lack lustre brakes out a bit of work underneath would not go a miss So strong flex bushes where order of the day Front mb6 arb Rear mg180 arb Rear skunk2 Lca Tegiwa rear tie bar All that and a few other bits to go along side of the KW v1 coilovers But that's fine but this has to be upto my build standards ,not building my TRINITY D after all she and I have been through half harted So powder coated candy purple that's better Mmmmm HOW DO YOU THINK MY LITTLE MB2 1.4 TRINITY D is coming along guys Now you all better check in tomorrow coz there will be a few bigger clues before you all get to know Friday is going to be the big day for you lot on civic 5 to see my go at building one of the best MB2 I said ONE of the best. Did not say the best Well you guys can see where it stands in the the M's Remember its not an MB6 so be fair

Just think how long Paul (knight) kept us waiting for a wheel reveal! I think this is the right way to do it But Dave, you better get posting COTM March is looming! Will have to wait for big boss Dave for cotm Hasn't Knight been running it (on the forum side) for months now Yer he has but we can not put pics up on the front page

Also if the disc was off a vti the would be 114 not 100 x4 you need 100x4

Just think how long Paul (knight) kept us waiting for a wheel reveal! I think this is the right way to do it But Dave, you better get posting COTM March is looming! Will have to wait for big boss Dave for cotm

Who's fluf ? God we will take over any thread and turn it to spam

X2 mod the oem box and kn panel filter

Looks like my mums tumble dryer hose What sort of dryer does your mum use that can take temps of 200

yer what don't know is all I did was to put another 1.4 back in No you are all ok guys it's still one epic build over all these year and from the point she was to being crushed

Arrrrrr guys tom says nah till she is 100% so not to tell you the spec or see her Ok I wil forget what Tom said So where am I on the project o yes my plan had gone to her being N/A MMMM this was going to need some work . I looked at what I had left on the car after it had all but gone it's no good I said we going to have to go right back to basics from the floor up and I knew then it was not going to be a quick job So kw v1 would be my coilovers of choice that where I would start, it need to loose the rear drums so would need to a disc conversation ( done this on trin2 as well) mmm no brakes upfront so need to sort that the was 262mm on the 1.4 they was not going to cut it and while I was on the brakes a new master cylinder would also be a good idea MG 180 will do a steering rack was also need MB6 one was dropped in ( yes I could of got a dc2 one but at the time was a pain to get hold of ) and a whole new braking loom put in mmm had to look nice to More tomoz guys If you want it ????

Looking good a lot of nice work