Jump to content

Recommended Posts

  On 2/12/2015 at 7:24 AM, EmZvr said:

That's a great price for custom items. Think about this while you're there :) http://moman.pl/eu/needles-lighting-kit---2x-uv-diode--fluorescent-paint,13,252060.html

 

I was looking at this, but then I saw that if you don't remove the top 2 bulbs from the cluster, the needles still light up as normal. Is there a big difference with how the dials look between keeping and removing the top 2 bulbs?

 

  On 2/12/2015 at 7:30 AM, snakey135 said:

The dials should look decent! Hopefully with the adjustments the parameters are all in the correct place :)

 

Yeah I sent them a picture of my original dials so they had some proper reference. :)

Link to comment
Share on other sites

  On 2/12/2015 at 11:11 AM, Roj said:

I was looking at this, but then I saw that if you don't remove the top 2 bulbs from the cluster, the needles still light up as normal. Is there a big difference with how the dials look between keeping and removing the top 2 bulbs?

 

I didn't even try how it will look with the top bulbs on. You should try it with and without bulbs and see how you like it. My plan was to have as little halogen bulbs as possible.

Link to comment
Share on other sites

  On 2/12/2015 at 2:52 PM, EmZvr said:

I didn't even try how it will look with the top bulbs on. You should try it with and without bulbs and see how you like it. My plan was to have as little halogen bulbs as possible.

 

I'll try both yeah.

Link to comment
Share on other sites

  On 2/10/2015 at 2:59 PM, Shafzzz said:

Can't wait for you to come to London so we can get these coilies on! Honda weekend it is! Cars finally getting lows, just leaves me and @Sorivity at stock height now.. I need to keep mine stock height though because of ground clearance :(

 

 

Next stop boost or cams yeah?

 

Thought so.

 

 

...

 

What is stock height?

  • Like 1
Link to comment
Share on other sites

  On 2/13/2015 at 4:25 PM, phill1975 said:

Set them as krzys says cause think they just set to lowest as mine were same

 

Yeah I added a good 30mm to the ride height all round. :)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...